X11 for standalone operation KRC2 BMW

    Hi folks.
    if You have other then password "kuka",
    You can easily recover password.
    Switching into Expert can be done with pendrive with a special key file.
    If it is BMW standard, for normal recover back'up, You have to have second pendrive with key file.
    In this case You have to insert into usb slot in the front of KRC2 cabinet pendrive with archive.zip (or name can be changed to any other, depends on this what is set in krckonfigurator) , and second into usb socket inside of cabinet > pendrive with a key).
    If You want to make it other way, You have to dig in into register file of Windows.
    I don't know what is Your configuration to secure system.
    Follow this topic:
    https://www.robot-forum.com/robotforum/kuk…sg5864/#msg5864
    Marek

    Hi again!

    Can anybody help me with BMW specific X11 – 64DD (and X12 – 24DD) – where are External E-Stop pins on these plugs? BMW service plug manual does not say about it. I have connected my External E-Stop to C8-C10 and C9-C11 which are „Safeguard” so it works only in Auto Mode (and probably in External). I need my E-stop to be working in all the modes.
    I suspect connecting it to B4-B1 and B2-B6 (now they are short) could work.
    Any ideas, friends?

    Regards
    Cez

Advertising from our partners