RJ3 R 2000 Power Down

    Hello all,


    My company has recently acquired an RJ3 R-2000 robot / controller. The controller does not have a separate operator panel (just a large cabinet)


    My question: The controller does not have a power on/off button, if I turn off the controller using the disconnect (large black handle) is the 480v shut off completely to the cabinet?


    I don't want to leave it on continuously, but I also don't want to lose master if the 'D' batteries should lose charge.


    thanks for any advice -


    RP

    Hi ,


    If before you turn off your controler check the teachpendant for a blal , battery low alarm you can turn it off with piece of mind. Isn't there a battery fault led on front of the controller?
    O yeah I think the 480V is cut if you turn of your main switch.

Advertising from our partners