We have a Arc Mate 100i that we swapped out with another 100i. The one that we put in does not have brakes on axis 5 and 6 and the old one did. Is there a way to disable the brakes on 5 and 6 so that I can get rid of the pulse mismatch after tip change?
Thanks for the help!!!!
-
-
Try this....
$SCR_GRP[1].$BRK_NUMBER[4] = 0
$SCR_GRP[1].$BRK_NUMBER[5] = 0
$SCR_GRP[1].$BRK_NUMBER[6] = 0You will have to do this in Control Start. It should work fine.