June 18, 2019, 01:23:52 PM
Robotforum | Industrial Robots Community

 Synchronizing Time of Robot and Sensor

normal_post Author Topic:  Synchronizing Time of Robot and Sensor  (Read 1467 times)

0 Members and 1 Guest are viewing this topic.

September 28, 2018, 02:27:22 PM
Read 1467 times
Offline

mohanadsawas


Hi Everybody..
With robot mounted vision sensor, I am trying to get the robot position synchronized with the sensor measurement...
The idea is create a system which can work with any robot ...
One solution could be to trigger the sensor at each point of the interpolation points and with some further processing we could get the exact robot position exactly at the sensor trigger time..
The question is how to get the interpolation points? with KUKA they can be accessed using RSI but i mean in general.. :help:

Today at 01:23:52 PM
Reply #1

Advertisement

Guest

September 28, 2018, 05:50:14 PM
Reply #1
Offline

SkyeFire

Global Moderator
I don't think there's any universal way to do this -- some robot brands, like Universal (hah hah) can't support it at all, so you can only get a signal within a certain error distance of a point.

For brands other than KUKA, they'll each have their own special equivalent unique to themselves.

The slower the robot is moving, the more accurately you can do this.  Alternatively, if you can afford to physically stop the robot at each position (and provide some settling time to handle vibration), getting the coordinates at the stopped position isn't hard.  But from the way you wrote your question, I suspect you're looking for on-the-fly coordinates.

December 22, 2018, 03:38:33 PM
Reply #2
Offline

panic mode

Global Moderator
Generate an interrupt the record $POS_INT
1) http://www.robot-forum.com/robotforum/kuka-robot-forum/read-first/
2) if you want reply about robot, post it in forum
3) read 1 and 2


Share via facebook Share via linkedin Share via pinterest Share via reddit Share via twitter

xx
synchronizing motion

Started by DerekTX on Fanuc Robot Forum

2 Replies
2201 Views
Last post August 01, 2015, 12:10:58 AM
by HawkME
clip
Problem with synchronizing with sunrise controller

Started by org0x on KUKA LBR IIWA

1 Replies
265 Views
Last post March 05, 2019, 07:55:31 AM
by Seulki
clip
Robot, creator, conveyor and sensor

Started by bomigaro3 on KUKA simulation software

0 Replies
2332 Views
Last post June 26, 2015, 01:25:14 PM
by bomigaro3
xx
Fanuc Robot Sensor Interface

Started by kaladze on Fanuc Robot Forum

9 Replies
5493 Views
Last post June 16, 2016, 08:33:49 AM
by kaladze