May 20, 2019, 07:01:24 AM
Robotforum | Industrial Robots Community

 Epson SCARA T3-401S Robot integration to Camera System

normal_post Author Topic:  Epson SCARA T3-401S Robot integration to Camera System  (Read 1937 times)

0 Members and 1 Guest are viewing this topic.

March 20, 2018, 09:51:05 AM
Read 1937 times


Hi I'm looking for some help and advice.

I am working on a machine design that will have an EPSON SCARA T3-401S robot for Picking and placing.
The robot will get vision guidance from 2 cameras.
Camera 1 is a fixed position camera, that will tell the Robot the Pick Position (X,Y,Angle) for the Part being picked.
Camera 2 is also a fixed position camera, that will tell the Robot the Place Position (X,Y,Angle for the part being placed onto.

My preferred option is for a Camera Controller that can control Camera 1 & 2 and integrate directly to the Robot.
I am looking into a Keyence CV-X470F to do this. 
Keyence provide a Robotic interface setup in their software. ( This allows the camera to calibrate to the robots co-ordinates and also jog the robot from the camera controller )
Would anyone have a sample program that will run on the Epson Robot  to integrate with the Keyence Camera ?

I am not restricted to camera controller at this stage of the design.  So I could use a Cognex Controller.
I do not have Cognex Integration Notes to the Epson Scara Robot.
Would anyone have notes or sample code to get a direct Integration from the Cognex Controller to the EPSON T3-401S.

My second preferred option is to integrate the Robot and Camera Controller through an Allen Bradley PLC.
I have the PLC Integration Notes from Keyence & Cognex to do this.
I do not have the EPSON integration notes to the Allen Bradley PLC. Would anyone have some help on the Epson integration to the PLC

Any help would be appreciated.
RoboG  :help:

Today at 07:01:24 AM
Reply #1



March 20, 2018, 11:02:58 AM
Reply #1

Fabian Munoz

Hi RobotG

Welcome to the robot forum

Why dont you use Epson vision ?

March 20, 2018, 01:16:39 PM
Reply #2


Thank you Fabien,

I didn't realise that Epson could provide an integrated vision guided solution.
It would be a neat solution.
Have you experience of using it ?   Is it easy to setup ?

March 20, 2018, 08:31:11 PM
Reply #3

Fabian Munoz

It;s really good  I use it all the time. Right now in our shop we are putting together 6 camerason different systems

Share via facebook Share via linkedin Share via pinterest Share via reddit Share via twitter

Epson Seiko ES551S Scara ROBOT

Started by smuscat on other Robots

5 Replies
Last post April 15, 2018, 12:05:10 PM
by smuscat
Epson Scara T6 and Anybus Ethernet/IP

Started by AndrewB on other Robots

0 Replies
Last post December 07, 2018, 05:49:17 AM
by AndrewB
MOVED: Epson Scara T6 and Anybus Ethernet/IP

Started by Werner Hampel on General Discussion of Industrial Robots Only

0 Replies
Last post December 07, 2018, 04:20:44 PM
by Werner Hampel
Laser System Integration - Need Advice

Started by djogf412 on Fanuc Robot Forum

4 Replies
Last post January 04, 2016, 12:57:31 PM
by djogf412