Author Topic: Kinematics of paint robots  (Read 1067 times)

0 Members and 1 Guest are viewing this topic.

Offline Vlad222

  • Full Member
  • ***
  • Thank You
  • -Given: 72
  • -Receive: 3
  • Posts: 121
Kinematics of paint robots
« on: January 23, 2018, 04:42:49 PM »
Hi all,

Why do paint robots have different kinematics (angle between 4 and 5 axes is 45 degrees (not 90 deg).

Is it for avoiding singularities?

What advantages and disadvantages of this kinematics? Why does this kinematic scheme used only for paint robots?
« Last Edit: January 23, 2018, 09:10:33 PM by Vlad222 »

Offline SkyeFire

  • Global Moderator
  • Hero Member
  • *****
  • Thank You
  • -Given: 32
  • -Receive: 947
  • Posts: 6429
Re: Kinematics of paint robots
« Reply #1 on: January 24, 2018, 11:18:28 AM »
It is primarily to avoid singularities, as I understand it.  Paint robots prioritize long, smooth, constant-velocity plans much more than most industrial robots, as opposed to strength and speed.

The paint-style wrist (I've never heard the technical term for this type of wrist), as I understand it, is slower, weaker, and more mechanically complex (and as such, more prone to wear and/or mechanical failure) than the "normal" triple-roll wrists.

One other advantage the "paint" wrists have is that they can be completely hollow through the center, which some robots (Reis laser-welding robots are one example, IIRC) make use of to avoid running complex hose/cable bundles down the outside of the arm.

Offline PW3

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 2
Re: Kinematics of paint robots
« Reply #2 on: October 07, 2018, 08:31:23 PM »
i am struggling now but 120-degree - yes, is in my mind confirmed from P200 hardware rj3 beyond, the wrist was 120-degree - and if i recall correctly, a 100 degree wrist on earlier paint models (P-150? until some point it also took the 120-deg? not sure, i think it may have been also an option), i might be able to confirm later

i'm not sure paint robot programming prioritises long, smooth and constant paths above any other applications, so I can't agree on that.

Offline carnews1

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 1
Re: Kinematics of paint robots
« Reply #3 on: October 24, 2018, 10:30:04 AM »
thank you for Tips