Author Topic: TCP/IP simulation in Roboguide  (Read 2791 times)

0 Members and 1 Guest are viewing this topic.

Offline jaksa999

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 1
TCP/IP simulation in Roboguide
« on: July 19, 2015, 05:03:51 PM »
Is there a way to simulate data exchange between two robots overTCP/IP in Roboguide?

this is part of the karel code im using to connect 2 robots over ethernet but can i do it in roboguide?
.
.
.      SET_VAR(entry,'*SYSTEM*','$HOSTC_CFG[7].$STRT_PATH','192.168.123.45',STATUS) ;   
       SET_VAR(entry,'*SYSTEM*','$HOSTC_CFG[7].$PATH','192.168.123.45',STATUS) ;   
       SET_VAR(entry,'*SYSTEM*','$HOSTC_CFG[7].$remote','192.168.123.45',STATUS) ;
       SET_VAR(entry,'*SYSTEM*','$HOSTC_CFG[7].$STRT_REMOTE','192.168.123.45',STATUS) ;
.
.
.
I basically need to get data from one robot to another and i only have ethernet in my disposal

Offline Jonson

  • Full Member
  • ***
  • Thank You
  • -Given: 12
  • -Receive: 15
  • Posts: 194
Re: TCP/IP simulation in Roboguide
« Reply #1 on: July 20, 2015, 12:02:45 AM »
Is there a way to simulate data exchange between two robots overTCP/IP in Roboguide?

this is part of the karel code im using to connect 2 robots over ethernet but can i do it in roboguide?
.
.
.      SET_VAR(entry,'*SYSTEM*','$HOSTC_CFG[7].$STRT_PATH','192.168.123.45',STATUS) ;   
       SET_VAR(entry,'*SYSTEM*','$HOSTC_CFG[7].$PATH','192.168.123.45',STATUS) ;   
       SET_VAR(entry,'*SYSTEM*','$HOSTC_CFG[7].$remote','192.168.123.45',STATUS) ;
       SET_VAR(entry,'*SYSTEM*','$HOSTC_CFG[7].$STRT_REMOTE','192.168.123.45',STATUS) ;
.
.
.
I basically need to get data from one robot to another and i only have ethernet in my disposal

I don't know, but I'm interesting in your issue. I also want to konw how to deal with this! Thank you!

Offline raulgaspargotor

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 1
Re: TCP/IP simulation in Roboguide
« Reply #2 on: October 06, 2015, 10:34:26 AM »
Good morning, i'm also interested... Any news?

Enviado desde mi D6503 mediante Tapatalk


Offline edgar_martin94

  • Newbie
  • *
  • Thank You
  • -Given: 1
  • -Receive: 0
  • Posts: 2
Re: TCP/IP simulation in Roboguide
« Reply #3 on: September 28, 2018, 06:23:28 PM »
I'm sorry, for my answer too late, set 127.0.0.xxx to IP host com. xxx must be greater than 2 for all robots, obviously must be different.