December 12, 2018, 07:23:34 PM
Robotforum | Support for Robotprogrammer and Users

Author Topic: HR view for Hyundai Robot  (Read 762 times)

0 Members and 1 Guest are viewing this topic.

March 11, 2018, 08:03:13 AM
Read 762 times


Hello Everyone

I have Hi5a S00 controller.
I want to copy/extract files from
the controller using HR view,
I have difficulty in connecting HR view
with Robot Controller.
Can someone explain the procedure to connect

Thanks in advance


March 29, 2018, 05:32:28 AM
Reply #1


0. Connect Ethernet cable (CAT5, UTP or STP) between Controller and Labtop

1. (Labtop) Modify IP
- IPv4 (recommend over 100)
- Subnet Mask
- Default Gateway or Controller Public IP

2. (Controller) Check IP from T/P
- Service - 2.Control Parameter - 9. Network - 1. Environment Setting - "TP (Public)"
Hi5 -> (defualt)
Hi5a -> (defualt)

4. Start HRView Program. and Change Connection type to Ethernet from Bottom Icon (First time, will be display RS-232C). and Click Left "Connect" Icon check Green mark.

4. (HRView) Assign new Controller IP
- Click "comm set" Icon.
EtherNet Setup window will be display

IP addr. (Click combo arrow and Select Labtop IP)

Robot Controller
Name (User Customize)
IP addr. (Input Actual Robot-Controller Public IP)

Click "Insert" command button

and, you'll be find connection list from left.

Select Host name and Click "OK" command button (EtherNet Setup window will be close)

5. Click Refresh Buttom

I Can handle it!

March 29, 2018, 06:30:44 AM
Reply #2


Thank you very much. I tried it two weeks ago. I Successfully connected Hi5a controller with my laptop but
HR view application was not responding, most of the time.
Thank you for taking time to reply for my query.