Author Topic: Bootdisk for Reis SRV 6 robot  (Read 372 times)

0 Members and 1 Guest are viewing this topic.

Offline hhandresen

  • Newbie
  • *
  • Thank You
  • -Given: 2
  • -Receive: 0
  • Posts: 3
Bootdisk for Reis SRV 6 robot
« on: May 11, 2018, 08:20:01 PM »
Hi,

I bought a Reis SRV 6 robot, it could start up in software, but the big 12v battery was bad, so I disconnected it to recharge it.

Stupid me :dance: now it wont boot anymore.

I Guess I need some kind of boot floppy disks - anyone can give me a hint what to do ?

The computer/controller is a SYS68K/CPU60

Best regards, Henrik Andresen, Denmark.

Offline hhandresen

  • Newbie
  • *
  • Thank You
  • -Given: 2
  • -Receive: 0
  • Posts: 3
Re: Bootdisk for Reis SRV 6 robot
« Reply #1 on: May 16, 2018, 07:03:27 AM »
I will reply to myself  :hi-bye:

The problem was not the batteri, but a dead cambus-module.

I restored a backup to the controller, and it tries to talk to the module, and then die cause of the defect.

After remove the module, the Robot starts up again.

/Henrik