December 19, 2018, 01:45:40 AM
Robotforum | Industrial Robots Community

 TP not Powering up


Author Topic:  TP not Powering up  (Read 757 times)

0 Members and 1 Guest are viewing this topic.

January 10, 2018, 11:43:34 PM
Read 757 times
Offline

Jacven


Hi

I'm currently working on two CFD controllers and for some reason the Teach Pendants on both controllers won't power up. I have checked a TP from a 3rd Controller that is working and that also doesn't power up. The TPs are brand new, taken out the box this morning and the are plugged in correctly. Anyone else had this problem before?

Linkback: https://www.robot-forum.com/robotforum/index.php?topic=25514.0

Today at 01:45:40 AM
Reply #1

Advertisement

Guest

January 22, 2018, 05:59:13 AM
Reply #1
Offline

r013071c5


Hi Jacven, you may want to check if the sequence board is powered on. Check if you are getting 24v, if there's no 24v you may wanna check the fuse.

February 06, 2018, 03:51:44 AM
Reply #2
Offline

Roboter


Check for TP cable damage, Check whether all 4 led are lit on in multi power supply unit. Check fuse of both sequence board and multi power supply unit.


Share via facebook Share via linkedin Share via pinterest Share via reddit Share via twitter

xx
KRC1 not powering up

Started by happytriger2000 on KUKA Robot Forum

27 Replies
9628 Views
Last post July 21, 2014, 05:40:02 AM
by happytriger2000
xx
Powering a KR C4 Compact Controller

Started by TheJanitor on KUKA Robot Forum

4 Replies
1994 Views
Last post October 21, 2016, 03:34:23 AM
by panic mode
xx
Interesting issue - KRC4NA Not powering down

Started by JonHopper on KUKA Robot Forum

1 Replies
1503 Views
Last post July 15, 2014, 06:58:04 PM
by panic mode