December 12, 2018, 07:06:31 PM
Robotforum | Support for Robotprogrammer and Users

Author Topic: TP not Powering up  (Read 741 times)

0 Members and 1 Guest are viewing this topic.

January 10, 2018, 11:43:34 PM
Read 741 times



I'm currently working on two CFD controllers and for some reason the Teach Pendants on both controllers won't power up. I have checked a TP from a 3rd Controller that is working and that also doesn't power up. The TPs are brand new, taken out the box this morning and the are plugged in correctly. Anyone else had this problem before?

January 22, 2018, 05:59:13 AM
Reply #1


Hi Jacven, you may want to check if the sequence board is powered on. Check if you are getting 24v, if there's no 24v you may wanna check the fuse.

February 06, 2018, 03:51:44 AM
Reply #2


Check for TP cable damage, Check whether all 4 led are lit on in multi power supply unit. Check fuse of both sequence board and multi power supply unit.