July 21, 2019, 04:45:11 AM
Robotforum | Industrial Robots Community

 Work Visual Errors While Deploying

normal_post Author Topic:  Work Visual Errors While Deploying  (Read 1212 times)

0 Members and 1 Guest are viewing this topic.

December 29, 2016, 05:26:53 AM
Read 1212 times
Offline

jorsborn


I added a device to my EtherCAT bus and am trying to deploy but I am getting an error.

Quote
WINDOWS-7AU5SCK is not reachable in the network at the moment, so a deployment to this controller is not possible

I have verified that my network adapter is configured with a valid IP (172.31.1.100) and is able to ping the controller (172.31.1.147). Any thoughts as to why the controller might not be reachable?

« Last Edit: December 29, 2016, 06:09:54 AM by jorsborn »

Today at 04:45:11 AM
Reply #1

Advertisement

Guest

December 29, 2016, 10:11:00 AM
Reply #1
Offline

jurii


If ping controller working and project download from controller without problem.
Then try turn off firewall, sometimes is problem with firewall block.

December 29, 2016, 07:24:47 PM
Reply #2
Offline

jorsborn


I got communication back but I am not sure why. I was trying to get at the network configuration page on the controller. It was disabled regardless of my credentials (expert, administrator, etc.). I figured something else was going on and so I initiated a cold boot and checked the reload files box. That seemed to fix whatever the issue was and allowed me to deploy my project. I would like to know how/why it was in that state however if anyone has any ideas.


Share via facebook Share via linkedin Share via pinterest Share via reddit Share via twitter

xx
work visual v2.4

Started by oscuriden on Español (Spanish)

0 Replies
2487 Views
Last post November 19, 2013, 07:47:24 AM
by oscuriden
xx
work visual 3.x.x

Started by zeev on KUKA Robot Forum

3 Replies
3258 Views
Last post May 18, 2014, 10:49:53 AM
by eusty
xx
Work Visual or VRP Port

Started by DannyDJ on KUKA Robot Forum

2 Replies
1728 Views
Last post February 20, 2014, 07:29:24 PM
by DannyDJ
xx
Work visual for Offline Programming

Started by rAviteja_g on KUKA Robot Forum

1 Replies
278 Views
Last post May 13, 2019, 02:16:52 PM
by SkyeFire