December 18, 2018, 01:46:58 PM
Robotforum | Industrial Robots Community

 unable to ping a robot through KLI port


Author Topic:  unable to ping a robot through KLI port  (Read 175 times)

0 Members and 1 Guest are viewing this topic.

December 06, 2018, 07:36:34 AM
Read 175 times
Offline

robowreck


hello all,

i am facing a problem while going online on a robot,i m unable to ping its IP..everything is in range but also not helping.
 KRC4 KR210
kss v8.3.17 HF3
robot ip : 10.211.30.107
subnet : 255.255.255.0

laptop ip : 10.211.30.100
subnet : 255.255.255.0

my ETHERNET  cable is also in working condition ,i cross checked with other robot to verify that.

help

 :help: :help:


Linkback: https://www.robot-forum.com/robotforum/index.php?topic=29924.0

Today at 01:46:58 PM
Reply #1

Advertisement

Guest

December 06, 2018, 10:01:42 AM
Reply #1
Offline

davidina


where did you set robot IP address?

December 06, 2018, 12:09:17 PM
Reply #2
Offline

robowreck


in network configuration options

December 06, 2018, 12:45:39 PM
Reply #3
Offline

panic mode

Global Moderator
you are not being specific.... question was if you assigned KLI ip address through KUKA HMI or through Windows. must be done through KUKA HMI.
1) http://www.robot-forum.com/robotforum/kuka-robot-forum/read-first/
2) if you want reply about robot, post it in forum
3) read 1 and 2

December 06, 2018, 07:41:40 PM
Reply #4
Offline

SkyeFire

Global Moderator
Where is your cable physically connected to the KRC4?  And what network hardware options does the KRC have installed?  There may be other physical ports you can try.  In extremis, you can connect directly to the KLI port on the KRC motherboard, as a temporary measure.  On rare occasions, an internal cable for the external KLI ports can be damaged or improperly routed.


Share via facebook Share via linkedin Share via pinterest Share via reddit Share via twitter

xx
serial port in Hyundai Robot

Started by amirelmi on other Robots

0 Replies
1153 Views
Last post November 20, 2013, 06:26:29 AM
by amirelmi
xx
Multi Port Communication with Robot

Started by arash on KUKA Robot Forum

2 Replies
514 Views
Last post April 02, 2018, 12:29:57 PM
by SkyeFire
question
robot control with s4c+ serial port

Started by yunusdereli on ABB Robot Forum

5 Replies
2563 Views
Last post September 19, 2015, 02:03:09 AM
by Jonson
question
Writing Commands to Robot Through Serial Port

Started by Mnenmenth on KUKA Robot Forum

6 Replies
1492 Views
Last post July 11, 2016, 10:50:49 PM
by Mnenmenth