June 18, 2019, 03:58:04 PM
Robotforum | Industrial Robots Community

 No power to teach Pendant

normal_post Author Topic:  No power to teach Pendant  (Read 1121 times)

0 Members and 1 Guest are viewing this topic.

September 25, 2017, 03:13:36 PM
Read 1121 times
Offline

Depot1213


KR C2 V4.1.6 SP3 after power was cycled now no power to pendent

Today at 03:58:04 PM
Reply #1

Advertisement

Guest

September 25, 2017, 03:30:05 PM
Reply #1
Offline

SkyeFire

Global Moderator
Describe what troubleshooting steps you have performed so far.  How have you determined that there is no power to the pendant?

September 25, 2017, 05:17:58 PM
Reply #2
Offline

Depot1213


checked the pendent plugs on the MFC card and there is no power there either, fan is not running, Red and Green lights flashing on the KPS module

September 25, 2017, 06:04:30 PM
Reply #3
Offline

SkyeFire

Global Moderator
"Fan not running"  -- which fan?

Assuming it's the PC rack fan, that means that your entire motherboard is not receiving power -- this is far beyond a simple pendant issue.  Unplug the power connector (two blue wires in a white plastic housing) from the top of the PC rack and check if any voltage is present.  It should be ~27VDC.

"Red and green lights on KPS"  -- which lights?  What blinking pattern?  How fast?

September 27, 2017, 11:23:05 AM
Reply #4
Offline

Depot1213


Kps top right side red light blinking real fast and the green half the speed of the red, no power have 0.00052


Share via facebook Share via linkedin Share via pinterest Share via reddit Share via twitter

xx
Is it possible to Power ON Teach pendant without the controller

Started by amarkangda on Yaskawa Motoman Robot Forum

2 Replies
1559 Views
Last post April 29, 2014, 06:49:15 AM
by amarkangda
moved
MOVED: No power to teach Pendant

Started by SkyeFire on General Discussion of Industrial Robots Only

0 Replies
935 Views
Last post September 25, 2017, 03:29:05 PM
by SkyeFire
xx
Cycle Power from Teach Pendant

Started by cbwalls on Fanuc Robot Forum

4 Replies
4775 Views
Last post November 30, 2017, 11:44:07 AM
by moln4r
xx
Warm restart IRC5 without power down and without using teach pendant

Started by Plc_User on ABB Robot Forum

3 Replies
3241 Views
Last post June 30, 2014, 08:54:33 AM
by Plc_User