Author Topic: New technologies with Usertech  (Read 387 times)

0 Members and 1 Guest are viewing this topic.

Offline Lugion11

  • Newbie
  • *
  • Thank You
  • -Given: 6
  • -Receive: 0
  • Posts: 7
New technologies with Usertech
« on: August 10, 2018, 04:12:09 PM »
Hello everyone!
I'm being working with Kuka robots for a couple of months, and one of my jobs is to create new technologies using usertech. It's a great tool, but the problem is that i don't know if is possible to install this technologies in another robot without usertech, someone know if can be done? or if there is another method to do so? 
Also, I have seen in some examples that use .dll libraries to create technologies, anyone knows something about it?
Thanks to all of you in advance!

Offline panic mode

  • Global Moderator
  • Hero Member
  • *****
  • Thank You
  • -Given: 77
  • -Receive: 789
  • Posts: 4899
Re: New technologies with Usertech
« Reply #1 on: August 13, 2018, 04:02:15 PM »
UserTech allows you to create own functions like inline forms, StatusKey bars etc.
To use them on another robot, that other robot must also have UserTech installed.
1) http://www.robot-forum.com/robotforum/kuka-robot-forum/read-first/
2) if you want reply about robot, post it in forum
3) read 1 and 2

Offline Lugion11

  • Newbie
  • *
  • Thank You
  • -Given: 6
  • -Receive: 0
  • Posts: 7
Re: New technologies with Usertech
« Reply #2 on: August 13, 2018, 04:43:40 PM »
Thanks for the reply Panic Mode!
for the .dll libraries, you know something  about it?
Also, to install this technologies you most generate a KOP file, but the only way to create this files is with th Kuka option package editor (KOPE). There is another way to create the KOP files?

Offline panic mode

  • Global Moderator
  • Hero Member
  • *****
  • Thank You
  • -Given: 77
  • -Receive: 789
  • Posts: 4899
Re: New technologies with Usertech
« Reply #3 on: August 13, 2018, 05:46:30 PM »
i don't know what DLLs you are talking about but suppose it is the UserTech. They are needed to make UserTech work.


You don't generate KOP files, Kuka does.
1) http://www.robot-forum.com/robotforum/kuka-robot-forum/read-first/
2) if you want reply about robot, post it in forum
3) read 1 and 2

Offline AndrewWang

  • Newbie
  • *
  • Thank You
  • -Given: 3
  • -Receive: 8
  • Posts: 29
Re: New technologies with Usertech
« Reply #4 on: August 14, 2018, 07:41:14 AM »
 Exactly, you could take use of kuka dlls to develop your own inline formula or status key bar instead of using usertech .Normally can you do that in case that you were in the development team of KUKA and what's more , kuka will not be liable to this when some damage or injuries  caused by your own packages. So i would like to suggest you to develop your own packages based on KUKA Technologies. Thanks

Offline Lugion11

  • Newbie
  • *
  • Thank You
  • -Given: 6
  • -Receive: 0
  • Posts: 7
Re: New technologies with Usertech
« Reply #5 on: August 15, 2018, 08:58:17 PM »
With a little of investigation I found out that workvisual can use the kuka option package editor, but i can't find it, anyone knows where can b e in workvisual? is another file to install or is in th bas instalation of workvisual?