Author Topic: VKRC2 files transfer  (Read 354 times)

0 Members and 1 Guest are viewing this topic.

Offline R.Beginner

  • Newbie
  • *
  • Thank You
  • -Given: 5
  • -Receive: 0
  • Posts: 8
VKRC2 files transfer
« on: March 05, 2018, 09:32:06 AM »
Hello everyone,

I wish to know what is the best way to transfer src files from external PC to controller VKRC2 other than via CD transfer. 

I'm currently using a VKRC_2 on Windows 95. (Kuka Robot KR_210_L180_200)

I'm a beginner on robot and I read a lot of things on some manuals and the forum but I didn't understand/find the information I wanted to.

Thank you in advance for your help.

Offline Leon

  • Full Member
  • ***
  • Thank You
  • -Given: 4
  • -Receive: 44
  • Posts: 213
Re: VKRC2 files transfer
« Reply #1 on: March 05, 2018, 11:15:19 AM »
the simplest thing would be to use the old fashioned floppy drive if your programs are not to big. I work with the same robot and kabinet and this took the least effort to set up. If you have a internet port on your kabinet you could use that and you could send your programs over a local network to the robot. This might be hard though becouse of working with win95. 
Every problem has a solution, that isn't the problem. The problem is the solution.

Offline fluke

  • Sr. Member
  • ****
  • Thank You
  • -Given: 12
  • -Receive: 69
  • Posts: 499
Re: VKRC2 files transfer
« Reply #2 on: March 05, 2018, 01:51:53 PM »
You can use Ethernet connection on VKRC2 Cabinet and share HDD. But please note you must be compile transferred file on robot.