June 19, 2019, 03:05:21 AM
Robotforum | Industrial Robots Community

 Kuka.HMI Easy 1.0 initialization errors

normal_post Author Topic:  Kuka.HMI Easy 1.0 initialization errors  (Read 123 times)

0 Members and 1 Guest are viewing this topic.

June 10, 2019, 11:20:14 PM
Read 123 times
Offline

roberthavill


Ive created an HMI using the kuka.hmi easy package which has so far been easy and successful. in my SPS it has a line of code to open the page

HmiEasyOpenView("HomePage")

this works most of the time, im also using a status key to reopen the hmi at any point which also only works sometimes. it seems after ive opened the page once and closed it again im unable to reopen it because of the error:

The module [Caption] could not be loaded due to initialization errors.

any ideas what this could be?

KRC4 compact - 8.3.20
KR6 R900 sixx

Today at 03:05:21 AM
Reply #1

Advertisement

Guest

June 11, 2019, 01:20:52 AM
Reply #1
Offline

panic mode

Global Moderator
for me it worked without issue... Had several different HMIs each with multiple pages.


Are you sure you are not doing something silly? Is the HMI application correct? Are you making sure the line calling up the HMI is only processed ONCE per button press?
« Last Edit: June 11, 2019, 01:58:28 AM by panic mode »
1) http://www.robot-forum.com/robotforum/kuka-robot-forum/read-first/
2) if you want reply about robot, post it in forum
3) read 1 and 2

June 11, 2019, 02:19:04 AM
Reply #2
Offline

roberthavill


yup that was it haha, was processing the call in a loop and calling it multiple times per press. thanks for that. good to sometimes be reminded it could be something silly and obvious  :uglyhammer2:


Share via facebook Share via linkedin Share via pinterest Share via reddit Share via twitter

question
INITIALIZATION OF THE NX-100

Started by João Felipe on Yaskawa Motoman Robot Forum

1 Replies
165 Views
Last post May 24, 2019, 11:35:13 AM
by asgary64
xx
Easy question in OrangeEdit

Started by rumoroso on KUKA Robot Forum

5 Replies
3233 Views
Last post July 16, 2014, 04:01:28 AM
by Fubini
xx
Initialization failed

Started by marcoss_aurelio on KUKA Robot Forum

2 Replies
1923 Views
Last post March 13, 2015, 02:04:03 PM
by marcoss_aurelio
clip
S4C+ HyperTerminal Initialization

Started by Skooter on Manuals, Software and Tools for ABB Robots

0 Replies
1044 Views
Last post August 11, 2017, 11:22:09 AM
by Skooter