Author Topic: How to clear messages which are made with MsgNotify("") command  (Read 752 times)

0 Members and 1 Guest are viewing this topic.

Offline RookieWithRobots

  • Newbie
  • *
  • Thank You
  • -Given: 2
  • -Receive: 1
  • Posts: 22
Hi there,

I'm planning to show some messages to operator with MsgNotify("information text") command. And it works I can show some messages. But we are having quite complex work cycle and there are coming lot of these massages. So is there any way to clear that list without pressing that confirm all button from teach pendant?

Offline Fubini

  • Hero Member
  • *****
  • Thank You
  • -Given: 4
  • -Receive: 165
  • Posts: 544
Re: How to clear messages which are made with MsgNotify("") command
« Reply #1 on: March 08, 2018, 09:53:18 AM »
Hi,

You could call

CONFIRM 0

inside your submit, whenever needed.

Fubini

Offline RookieWithRobots

  • Newbie
  • *
  • Thank You
  • -Given: 2
  • -Receive: 1
  • Posts: 22
Re: How to clear messages which are made with MsgNotify("") command
« Reply #2 on: March 12, 2018, 06:25:03 AM »
Hi there,
Could you specify that little bit more? Im not totally following what and how that CONFIRM 0 should do and where.

Offline RookieWithRobots

  • Newbie
  • *
  • Thank You
  • -Given: 2
  • -Receive: 1
  • Posts: 22
Re: How to clear messages which are made with MsgNotify("") command
« Reply #3 on: March 13, 2018, 09:20:41 PM »
Could anyone tell me little bit more about this CONFIRM 0 command? What it does and how I should use it.

Offline panic mode

  • Global Moderator
  • Hero Member
  • *****
  • Thank You
  • -Given: 72
  • -Receive: 761
  • Posts: 4753
Re: How to clear messages which are made with MsgNotify("") command
« Reply #4 on: March 13, 2018, 09:28:10 PM »
try it...
1) http://www.robot-forum.com/robotforum/kuka-robot-forum/read-first/
2) if you want reply about robot, post it in forum
3) read 1 and 2

Offline RookieWithRobots

  • Newbie
  • *
  • Thank You
  • -Given: 2
  • -Receive: 1
  • Posts: 22
Re: How to clear messages which are made with MsgNotify("") command
« Reply #5 on: March 13, 2018, 09:59:15 PM »
I will....but the problem is that i dont have robot available right now. And i try to prepare my stuff before next visit to customer ar much as possible. I tried to search that CONFIRM command from Kuka manuals but havent found anything. Maybe I was searching for wrong ones so now this forum is the best place to found out.

Offline davidina

  • Newbie
  • *
  • Thank You
  • -Given: 6
  • -Receive: 12
  • Posts: 40
Re: How to clear messages which are made with MsgNotify("") command
« Reply #6 on: March 14, 2018, 12:25:12 PM »
try it...
I just tried it, but did not work. I think
Code: [Select]
MsgQuit("this is a quit message", "myMod") should do

Offline panic mode

  • Global Moderator
  • Hero Member
  • *****
  • Thank You
  • -Given: 72
  • -Receive: 761
  • Posts: 4753
Re: How to clear messages which are made with MsgNotify("") command
« Reply #7 on: March 14, 2018, 12:49:28 PM »
check topic name...


btw i just tried it and it does not work
« Last Edit: March 14, 2018, 01:01:30 PM by panic mode »
1) http://www.robot-forum.com/robotforum/kuka-robot-forum/read-first/
2) if you want reply about robot, post it in forum
3) read 1 and 2

Offline RookieWithRobots

  • Newbie
  • *
  • Thank You
  • -Given: 2
  • -Receive: 1
  • Posts: 22
Re: How to clear messages which are made with MsgNotify("") command
« Reply #8 on: March 15, 2018, 02:35:14 PM »
I tried it and didn't get it work. PanicMode...could you tell me how this really should work ;=)


Offline panic mode

  • Global Moderator
  • Hero Member
  • *****
  • Thank You
  • -Given: 72
  • -Receive: 761
  • Posts: 4753
Re: How to clear messages which are made with MsgNotify("") command
« Reply #9 on: March 15, 2018, 05:26:38 PM »
i don't know... it is an undocumented command.


most messages end up in message buffer. there are functions to place message into buffer, remove message from buffer (that removes it from screen) etc. but buffer can hold only limited number of messages.


notification messages are different... they are the only message type that is not managed in message buffer. so the only way to remove them from display is to manually acknowledge them. mentioned command was supposed to allows another way of getting them out of way but it did not work for me, may be depreciated etc. 


1) http://www.robot-forum.com/robotforum/kuka-robot-forum/read-first/
2) if you want reply about robot, post it in forum
3) read 1 and 2