July 23, 2019, 05:52:15 AM
Robotforum | Industrial Robots Community

 Kemppi Arc + FANUC

normal_post Author Topic:  Kemppi Arc + FANUC  (Read 280 times)

0 Members and 1 Guest are viewing this topic.

February 08, 2019, 03:19:21 AM
Read 280 times


Good night people.
I have a FANUC robot with a Kemppi soldering machine with the K60 controller. What happens is when I change my welding settings in the schedules, the wire does not accept the values. The values ​​are only accepted if inserted directly in the welding machine. Other values ​​such as voltage and feedrate also do not respond.

Today at 05:52:15 AM
Reply #1



February 11, 2019, 04:48:53 PM
Reply #1


Do you have digital or analog communication?

Look for digital signal Online or Kemppi Online. If you want to send welding parameters from robot to power source this signal must be ON.

If it's OFF, KempArc weld with parameters set in selected Channel.

Share via facebook Share via linkedin Share via pinterest Share via reddit Share via twitter