July 21, 2019, 05:08:27 AM
Robotforum | Industrial Robots Community

 Complete rj-2 controller sotware to run fanuc s420-if

normal_post Author Topic:  Complete rj-2 controller sotware to run fanuc s420-if  (Read 1148 times)

0 Members and 1 Guest are viewing this topic.

April 26, 2017, 06:13:03 PM
Read 1148 times


Hi so im looking to buy a pair of Fanuc S420-if robots. they appear to be in good condition coming from a working factory environment. Each unit has an RJ-2 controller. I recently learned that if these robots have been powered down for an extended period of time, their CPU batteries die and they become beating heart corpses if you turn them on, I.e. a machine with no O.S. I also understand that FANUC corporation is a den of thieves and they will charge you your first born child to send you a copy of the O.S. essentially can anyone send me the O.S. software for the Rj-2? otherwise i dont think it would be wise at all to aquire these units.

Today at 05:08:27 AM
Reply #1



June 27, 2017, 04:11:05 PM
Reply #1


Does anyone know if Fanuc will even sell the software. The robot we have is in the same position and we are rather stuck with how to move forward.

Share via facebook Share via linkedin Share via pinterest Share via reddit Share via twitter