Robotforum | Industrial Robots Community

Industrial Robot Support and Discussion Center => Fanuc Robot Forum => Topic started by: linuxsand on October 20, 2015, 10:30:59 AM

Title: A website: Know FANUC alarm codes
Post by: linuxsand on October 20, 2015, 10:30:59 AM
http://www.linuxsand.info/fanuc/ (http://www.linuxsand.info/fanuc/)

Hi, I made this website for searching alarm codes of FANUC robots. Webpage was optimized for mobile browser. If the site is down, email me : root {a} linuxsand <dot> info

Usage:
1. normal way: input alarm code, you'll get the description / cause / remedy.
2. command line: curl http://linuxsand.info/fanuc/code-api/INTP-440

One more thing, I also made a free tool for commenting I/O and registers:
https://www.robot-forum.com/.../comment-tool-based-on-comment-tool/ (https://www.robot-forum.com/robotforum/tools-for-fanuc-robots-(no-manuals-permitted-by-order-of-fanuc-robotics)/comment-tool-based-on-comment-tool/)


Title: Re: A website: Know FANUC alarm codes
Post by: dmbj on October 20, 2015, 11:43:36 AM
Super cool.

Bookmarked.

Title: Re: A website: Know FANUC alarm codes
Post by: Jonson on October 20, 2015, 11:20:06 PM
That's so good!
Title: Re: A website: Know FANUC alarm codes
Post by: amy_fields on October 22, 2015, 12:54:22 AM
Sweet!  Good Job.  Bookmarked
Title: Re: A website: Know FANUC alarm codes
Post by: Tobi on October 22, 2015, 01:14:19 PM
Awesome!!
Will be used a lot.
Title: Re: A website: Know FANUC alarm codes
Post by: robcad on October 25, 2015, 09:17:47 PM
   linuxsand Good Job

            :merci:

 
Title: Re: A website: Know FANUC alarm codes
Post by: swapnil on October 27, 2015, 10:37:25 AM
what a nicee Site.
Tons of Thanks @linuxsand
Bookmarked.
Title: Re: A website: Know FANUC alarm codes
Post by: Godfather on December 10, 2015, 12:45:17 PM
:guru:
Title: Re: A website: Know FANUC alarm codes
Post by: Hokuryu on December 11, 2015, 09:31:00 AM
Thank you!
Title: Re: A website: Know FANUC alarm codes
Post by: Nation on December 11, 2015, 05:43:14 PM
We should sticky this thread. Very useful.

Edit: Hey it got stickied! Sweet.
Title: Re: A website: Know FANUC alarm codes
Post by: irobot on December 17, 2015, 02:24:30 AM
good job
Title: Re: A website: Know FANUC alarm codes
Post by: Iprogram on January 15, 2016, 05:18:47 PM
How is this different than pushing the shift key and DIAG at the same time?
Title: Re: A website: Know FANUC alarm codes
Post by: linuxsand on January 16, 2016, 03:40:19 AM

I extracted contents from manual (Alarm codes list of R-30iB, B-83284EN-1/02) , which includes more info, i.e. cause & remedy.

I have no idea if Fanuc teach pendant had those built-in info.
Title: Re: A website: Know FANUC alarm codes
Post by: Nation on January 16, 2016, 01:50:10 PM



They do, but I have found that the remedies in the diag area of teach pendant tend to lag behind what is in the manual. Other times the fault simply won't be in the diag area, but it will be in manual.


See above.
Title: Re: A website: Know FANUC alarm codes
Post by: trader on February 10, 2016, 01:24:02 AM
VERY NICE.. Thank you..
Title: Re: A website: Know FANUC alarm codes
Post by: robotatwork on February 20, 2016, 04:05:26 AM
Thank you Linux
 :respect:
Title: Re: A website: Know FANUC alarm codes
Post by: Opps! on March 23, 2016, 01:20:51 PM
Supper! Thank you Linux
Title: Re: A website: Know FANUC alarm codes
Post by: Kosy on July 20, 2016, 11:19:26 AM
 :respect:
Title: Re: A website: Know FANUC alarm codes
Post by: zanybu on July 27, 2016, 08:28:04 AM
thank you very much  :merci:
Title: Re: A website: Know FANUC alarm codes
Post by: Dean on September 06, 2016, 02:13:29 PM
how do i turn on the input to get rid of the "IMSTP" ERROR ? from what i have read I go to I/O, select the "type" , then selest "UOP" however i am not geting "UOP" option. the only options I get are  "Digital/Group/Robot" am i doing something wrong?  any advice?
Title: Re: A website: Know FANUC alarm codes
Post by: SJT on September 21, 2016, 07:48:07 PM
You probably figured this out already but you have to enable Full menus. FCTN--> '0' for Next --> then 1 Quick/Full menus
Title: Re: A website: Know FANUC alarm codes
Post by: mightyduck on November 06, 2016, 05:14:49 PM
 :top:
Thank You... Very good Job
Title: Re: A website: Know FANUC alarm codes
Post by: Robotworker on January 19, 2017, 02:11:00 PM
Also you can find here alarm codes for different types:

http://alarmcodes.com/
Title: Re: A website: Know FANUC alarm codes
Post by: gauravu on February 02, 2017, 04:38:54 PM
Hello,
I have a Fanuc robot and a peculiar problem. It just started yesterday. Whenever I opened up the safety gate and close it and try to restart the operation the robot does not auto start and instead gives an error message" UOP Hold was detected". Please help.

Regards
Title: Re: A website: Know FANUC alarm codes
Post by: rich43 on June 23, 2017, 05:18:36 PM
Excellent!!!

Thank you
Title: Re: A website: Know FANUC alarm codes
Post by: Tlalóc on October 24, 2017, 01:04:34 PM
what about this site:

http://alarmcodes.com/
Title: Re: A website: Know FANUC alarm codes
Post by: linuxsand on November 02, 2017, 08:28:01 AM

I suppose the search function of that site was powered by Google Custom Search, if people in some countries can not visit google service......
Title: Re: A website: Know FANUC alarm codes
Post by: ATD94 on December 15, 2018, 05:59:21 PM
 :merci:

Super useful! Great work!
Title: Re: A website: Know FANUC alarm codes
Post by: allWar on May 16, 2019, 01:24:16 PM
Wow! Thank you master!