December 17, 2018, 01:31:18 PM
Robotforum | Industrial Robots Community

 A website: Know FANUC alarm codes


Author Topic:  A website: Know FANUC alarm codes  (Read 36754 times)

0 Members and 1 Guest are viewing this topic.

October 20, 2015, 10:30:59 AM
Read 36754 times
Offline

linuxsand


http://www.linuxsand.info/fanuc/

Hi, I made this website for searching alarm codes of FANUC robots. Webpage was optimized for mobile browser. If the site is down, email me : root {a} linuxsand {dot} info

Usage: input alarm code, you'll get the description / cause / remedy.

One more thing, I also made a free tool for commenting I/O and registers: https://www.robot-forum.com/.../comment-tool-based-on-comment-tool/




Linkback: https://www.robot-forum.com/robotforum/index.php?topic=18141.0
« Last Edit: November 16, 2017, 02:34:50 AM by linuxsand »

Today at 01:31:18 PM
Reply #1

Advertisement

Guest

October 20, 2015, 11:43:36 AM
Reply #1
Offline

dmbj


Super cool.

Bookmarked.


October 20, 2015, 11:20:06 PM
Reply #2
Offline

Jonson



October 22, 2015, 12:54:22 AM
Reply #3
Offline

amy_fields


Sweet!  Good Job.  Bookmarked

October 22, 2015, 01:14:19 PM
Reply #4
Offline

Tobi


Awesome!!
Will be used a lot.

Today at 01:31:18 PM
Reply #5

Advertisement

Guest

October 25, 2015, 09:17:47 PM
Reply #5
Offline

robcad


   linuxsand Good Job

            :merci:

 

October 27, 2015, 10:37:25 AM
Reply #6
Offline

swapnil


what a nicee Site.
Tons of Thanks @linuxsand
Bookmarked.
All power is within you; you can do anything and everything. Believe in that; do not believe that you are weak; do not believe that you are half-crazy lunatic, as most of us believe now-a-days. You can do anything and everything, without even the guidance of any one. All power is there. Stand up and express the divinity within you--Swami Vivekananda

December 10, 2015, 12:45:17 PM
Reply #7
Offline

Godfather


Two things are infinite: the universe and human stupidity, and I’m not sure about the universe!

December 11, 2015, 09:31:00 AM
Reply #8
Offline

Hokuryu



December 11, 2015, 05:43:14 PM
Reply #9
Offline

Nation


We should sticky this thread. Very useful.

Edit: Hey it got stickied! Sweet.
« Last Edit: December 14, 2015, 02:08:19 PM by Nation »
Check out the position converter I wrote here!

Today at 01:31:18 PM
Reply #10

Advertisement

Guest

December 17, 2015, 02:24:30 AM
Reply #10
Offline

irobot


KUKA Conntroller : _________
KSS Software : ____________
Robot Model: _____________

January 15, 2016, 05:18:47 PM
Reply #11
Offline

Iprogram


How is this different than pushing the shift key and DIAG at the same time?

January 16, 2016, 03:40:19 AM
Reply #12
Offline

linuxsand



I extracted contents from manual (Alarm codes list of R-30iB, B-83284EN-1/02) , which includes more info, i.e. cause & remedy.

I have no idea if Fanuc teach pendant had those built-in info.

January 16, 2016, 01:50:10 PM
Reply #13
Offline

Nation





They do, but I have found that the remedies in the diag area of teach pendant tend to lag behind what is in the manual. Other times the fault simply won't be in the diag area, but it will be in manual.


See above.

February 10, 2016, 01:24:02 AM
Reply #14
Offline

trader


VERY NICE.. Thank you..

Today at 01:31:18 PM
Reply #15

Advertisement

Guest

February 20, 2016, 04:05:26 AM
Reply #15
Offline

robotatwork



March 23, 2016, 01:20:51 PM
Reply #16
Offline

Opps!


Supper! Thank you Linux

July 20, 2016, 11:19:26 AM
Reply #17
Offline

Kosy



July 27, 2016, 08:28:04 AM
Reply #18
Offline

zanybu



September 06, 2016, 02:13:29 PM
Reply #19
Offline

Dean


how do i turn on the input to get rid of the "IMSTP" ERROR ? from what i have read I go to I/O, select the "type" , then selest "UOP" however i am not geting "UOP" option. the only options I get are  "Digital/Group/Robot" am i doing something wrong?  any advice?

Today at 01:31:18 PM
Reply #20

Advertisement

Guest

September 21, 2016, 07:48:07 PM
Reply #20
Offline

SJT


You probably figured this out already but you have to enable Full menus. FCTN--> '0' for Next --> then 1 Quick/Full menus

November 06, 2016, 05:14:49 PM
Reply #21
Offline

mightyduck


 :top:
Thank You... Very good Job

January 19, 2017, 02:11:00 PM
Reply #22
Offline

Robotworker


Also you can find here alarm codes for different types:

http://alarmcodes.com/

February 02, 2017, 04:38:54 PM
Reply #23
Offline

gauravu


Hello,
I have a Fanuc robot and a peculiar problem. It just started yesterday. Whenever I opened up the safety gate and close it and try to restart the operation the robot does not auto start and instead gives an error message" UOP Hold was detected". Please help.

Regards

June 23, 2017, 05:18:36 PM
Reply #24
Offline

rich43



Today at 01:31:18 PM
Reply #25

Advertisement

Guest


Share via facebook Share via linkedin Share via pinterest Share via reddit Share via twitter

thumbup
All Fanuc Alarm Codes

Started by amir65esf on Fanuc Robot Forum

1 Replies
2716 Views
Last post December 03, 2016, 10:51:43 AM
by amir65esf
xx
Link for FANUC R30ib alarm codes thread above

Started by Nightmare on Fanuc Robot Forum

2 Replies
500 Views
Last post May 12, 2018, 03:04:31 AM
by Nightmare
xx
Alarm codes

Started by dha on Fanuc Robot Forum

5 Replies
2368 Views
Last post July 23, 2016, 09:26:15 AM
by dha
clip
Alarm codes 5011 and 5053

Started by asgary64 on Yaskawa Motoman Robot Forum

11 Replies
1551 Views
Last post February 27, 2018, 08:19:15 AM
by potis