Author Topic: Robcad to Process Simulate  (Read 15823 times)

0 Members and 1 Guest are viewing this topic.

SimGuy7

  • Guest
Robcad to Process Simulate
« on: November 23, 2010, 01:24:02 PM »
Hi Everyone,

I'm looking into taking a Robcad cell and importing it into Process Simulate.  I'm wondering what exactly this involves. 

Does the entire workcell have to be rebuilt from scratch importing the .co's, creating a layout then exporting the paths from Robcad and uploading them to Process Simulate?

I could use any help or suggestions.  Thanks.

Offline simspec

  • Full Member
  • ***
  • Thank You
  • -Given: 0
  • -Receive: 25
  • Posts: 164
Re: Robcad to Process Simulate
« Reply #1 on: November 23, 2010, 09:37:09 PM »
you dont have to rebuild it

look in process designer / simulare help for Legacy Cells, it should explain how to do it.


SimGuy7

  • Guest
Re: Robcad to Process Simulate
« Reply #2 on: November 24, 2010, 04:51:41 PM »
Thanks for the reply.  I tried the legacy cell function but I couldn't get it to work.  I figured that's for taking a Process Simulate workcell and going back to Robcad. 

Offline simspec

  • Full Member
  • ***
  • Thank You
  • -Given: 0
  • -Receive: 25
  • Posts: 164
Re: Robcad to Process Simulate
« Reply #3 on: November 24, 2010, 09:01:00 PM »
its for robcad to process simulate,

you will need to run it several times, it will produce an error log (*.co that need to be added to the proc sim database and other things), fix the errors then run legacy cells again until you dont get any more errors.

SimGuy7

  • Guest
Re: Robcad to Process Simulate
« Reply #4 on: November 25, 2010, 12:28:55 PM »
Hmmm... This is the error message I get  :wallbash:

Creating Legacy Target Cell From the Source Cell:
    ERROR: The source cell is already a legacy cell.

Also, I don't have the "Robcad connectivity studies" option either.... it's greyed out.  I'm assuming I need the Robcad integration license and a Robcad seat installed to do this....  :bawling:
« Last Edit: November 25, 2010, 01:28:00 PM by SimGuy7 »

Offline simspec

  • Full Member
  • ***
  • Thank You
  • -Given: 0
  • -Receive: 25
  • Posts: 164
Re: Robcad to Process Simulate
« Reply #5 on: November 25, 2010, 09:16:00 PM »
not sure about the licensing (ive only done legacy cells a few times),
will have to have a think.

shettigarbp

  • Guest
Re: Robcad to Process Simulate
« Reply #6 on: December 29, 2010, 06:21:39 AM »
Hi all

I am a new user of Process simulate.

I have tried to import a ROBCAD cell to Process simulate as well as Process simulate to robcad. Both are working fine.

To import robcad to process simulate, we need to create a .jt file inside the .co file of robcad. this can be done by using command called "upgradetoversion" in cmd.

To import Process simulate to robcad,  we need to convert .cojt file of process simulate to .co ( inside jt file).

Before importing robcad cell to process simulate, we need to go into  ROBCAD->applications->process integration, we have to assign each and every path of the robcad cell to respective robots. This is must.

Regards
shettigar

msundbac

  • Guest
Re: Robcad to Process Simulate
« Reply #7 on: January 11, 2011, 06:56:20 AM »
Did you solve the migration? if not I can send you a step-by step guide that we use at VolvoCars.

Regards, Mathias

SimGuy7

  • Guest
Re: Robcad to Process Simulate
« Reply #8 on: January 18, 2011, 02:31:36 PM »
msundbac,

That would be great.  I'm in the process of getting a license to enable Robcad integration.  I'm sure any documentation would be helpful.

RenanDiCarlo

  • Guest
Re: Robcad to Process Simulate
« Reply #9 on: May 30, 2011, 05:38:07 PM »
Good afternoon

I'm trying to import an Robcad weld study to use in Process Simulate. This study envolves robots, guns and parts. When I do the Legacy Cell procedure like specified in help, just the following files appears:

+ administrator folder
 L...........+  Lost and Found
               L............Y:\TRABALHO\OS_1003_11_326_3V\INPUTS\LIBRARY_ROBCAD\ossatura_230311tg.ce


I need to do some special setup on Robcad before export?                   
The parts must be converted to .cojt or maintain .co?

Sorry about my "Google Translator" english   :icon_wink:

mag_de_coco

  • Guest
Re: Robcad to Process Simulate
« Reply #10 on: July 25, 2011, 07:07:21 AM »
Hi all,

I have the same problem. The migration does not work. Have someone of you a documentation?

Hello msundbac, can I get the step-by step guide for VolvoCars, too?


Regards,
Martin

Offline sweety

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 7
Re: Robcad to Process Simulate
« Reply #11 on: July 15, 2014, 10:06:23 AM »
Hello Mathias (msundbac)

Kindly send me also the step by step procedure for integrating Robcad to process simulate. I am trying the same for few days but its not happening. :wallbash:
 :help: :merci:

Thanks
Megha Swati
sweetzzzz

raj_007

  • Guest
Re: Robcad to Process Simulate
« Reply #12 on: August 06, 2014, 12:13:24 PM »
Can i get a copy of the same msundbac, or any other user

Offline noface

  • Newbie
  • *
  • Thank You
  • -Given: 1
  • -Receive: 0
  • Posts: 10
Re: Robcad to Process Simulate
« Reply #13 on: August 13, 2014, 10:46:51 AM »
Hi all,

I need also to import a cell from Robcad to PS. I guess I need a license because of I do have the problem Simgguy7 had. If anyone could send any detailed documentation related to this topic it would be great. I have already read PS HelpContents but  I still have some problems. ???

Thanks in advance! :top:
« Last Edit: August 13, 2014, 11:00:07 AM by noface »

pnorb

  • Guest
Re: Robcad to Process Simulate
« Reply #14 on: September 08, 2014, 04:18:00 PM »
Did you solve the migration? if not I can send you a step-by step guide that we use at VolvoCars.

Regards, Mathias

Dear Mathias!

Would you be so kind (or someone who got this solution) as to send me the step by step importing in an e-mail? (pnorb3@gmail.com)

Thanks,
Norbi