June 18, 2019, 03:23:12 PM
Robotforum | Industrial Robots Community

 Smb ext axis

normal_post Author Topic:  Smb ext axis  (Read 211 times)

0 Members and 1 Guest are viewing this topic.

May 10, 2019, 08:26:02 PM
Read 211 times
Offline

PaulSola


Hello
I have a question about smb ext axis connection

So I am going to connect ext resolver to 313 smb
And I have a question
So there are 3 ports : smb 1-2, 1-4, 3-6

And port 1-2 and 1-4 consists axis 1 nodes
Does it matter on what port I connect my resolver?
https://drive.google.com/file/d/155YU1_l9cFzOljO-UTNTZXV2zJLyTWda/view?usp=drivesdk

And the second question : I see the abbreviation ( axis 1-3 exciter )
And on port 1-2 there are 2 ones
( so they are identical)
Does it matter on which one I should connect my resolver exciter?

And last question:
There are some jumpers on smb( photo added)
https://drive.google.com/file/d/1Pa3lfg7aPgHYpJQrgIamcAmvHAYq9xB8/view?usp=drivesdk
Should I do anything with it to tell smb that I will use only one axis?

Thank you!

Thank you

Today at 03:23:12 PM
Reply #1

Advertisement

Guest

May 12, 2019, 10:09:50 AM
Reply #1
Offline

PaulSola


Anybody?

May 13, 2019, 04:06:56 PM
Reply #2
Offline

SomeTekk


A lot more information will need to be provided before assistance of any value can be provided.

-What type of external axis, spot weld servo, rotating positioner, linear positioner, etc?
-Is the axis connecting to the SMB inside the manipulator, or through an external SM box?
-Is the new device connecting to a working system or is this a new install?
-What type of control?

That is a good place to start.


Share via facebook Share via linkedin Share via pinterest Share via reddit Share via twitter