March 21, 2019, 12:05:02 AM
Robotforum | Industrial Robots Community

 HOW TO PUT ABB IN AUTO??????????

Author Topic:  HOW TO PUT ABB IN AUTO??????????  (Read 545 times)

0 Members and 1 Guest are viewing this topic.

July 11, 2018, 12:31:59 PM
Read 545 times
Offline

Dbonds28


I have an ABB IRC4 manual 6700-801174 im trying to put it in auto and have not the first clue as to how, ANY HELP..

Today at 12:05:02 AM
Reply #1

Advertisement

Guest

July 11, 2018, 01:33:46 PM
Reply #1
Offline

Fabian Munoz

Administrator
Hi
First, be sure that the robot is at home position on a a safe position to start

Do you have a key on the controller ? Turn the key to AUTO (i'm assuming is on Manual now)
Make sure that the program selected is the right one?

I can not help you more with the first two questions. I have to trust your logic

Look at the teach pendant Are you getting a question acknowledging that you turn the key to auto ?

Get to that point and write us again

What's going to happen is that depending on your controller set up, you might need to select run But the issue here is that the robot is at 100% speed. If I was you I slow it down
somar

July 11, 2018, 03:10:49 PM
Reply #2
Offline

jarm


After you acknowledge the key turn to auto on the pendant, the white flashing button should go out. Press it and it should go solid. On the pendant in the production window, press the play button by the joystick. The stop signs turn to go signs. Your system is ready to go. Press your cycle start button.

You have to make sure you have selected the right program in the production manager and you may need to reset any light curtains and close all doors. White light won’t go solid if a door is open or a light curtain is tripped.


Sent from my iPhone using Tapatalk

July 12, 2018, 09:57:17 AM
Reply #3
Offline

SomeTekk


One possible reason it may not be as easy as it would seem is if the system is equipped with SafeMove2 AND the Keyless mode selector option.

See the attached image.


Share via facebook Share via linkedin Share via pinterest Share via reddit Share via twitter

clip
VKRC1 how to auto mode from ext.auto and other tips

Started by tommylight on KUKA Robot Forum

24 Replies
8276 Views
Last post November 17, 2018, 10:49:54 AM
by Tomek155
xx
pp to main after switching from manual to auto or auto to manual M98 S4C

Started by Kroket on ABB Robot Forum

0 Replies
2019 Views
Last post September 18, 2013, 01:51:12 PM
by Kroket
xx
$VEL in Auto Vs Ext

Started by MazdaTrio on KUKA Robot Forum

8 Replies
4144 Views
Last post August 26, 2013, 01:20:13 PM
by SkyeFire
xx
T1/T2/AUTO Key

Started by droth on Fanuc Robot Forum

0 Replies
786 Views
Last post August 21, 2017, 12:21:15 PM
by droth