March 23, 2019, 09:30:03 AM
Robotforum | Industrial Robots Community

 ABB LASER Cutting Robot

Author Topic:  ABB LASER Cutting Robot  (Read 513 times)

0 Members and 1 Guest are viewing this topic.

December 14, 2018, 03:02:28 AM
Read 513 times
Offline

robomaniac


Hi Everyone,
I am looking for an expert advice regarding ABB Laser Cutting Robot process.We are moving some fixture for LASER cell in an automotive plant.I have no prior practical experience with any LASER Cutting activity.I have read the Cutting PowerPack manual and tried to get some basic fundamentals about LASER parameters.But I have few questions to clear up my thoughts.
So,when I start teaching the new points for a new part,can anyone tell me what distance I have to maintain between LASER head and the part during teaching a new points?
Also any other general advice regarding Robotic LASER Cutting would be greatly appreciated.
Thank you.

Today at 09:30:03 AM
Reply #1

Advertisement

Guest

December 17, 2018, 01:57:36 PM
Reply #1
Offline

Iowan


Is your laser attached to the robot, or does the robot move the part in front of a fixed laser? Distance between part and laser will probably depend on how TCP is taught.

December 18, 2018, 03:37:21 AM
Reply #2
Offline

Skooter


Depends on the focal point, desired kerf characteristics, the material, etc.  The laser manufacturer may offer teaching tips/nozzles that would be very beneficial.
Not familiar the Cutting PowerPac/software but you may be able to set a distance offset there once it's known.

December 19, 2018, 09:27:36 PM
Reply #3
Offline

robomaniac


The laser is mounted on the robot and the part is turning on a trunnion.

December 28, 2018, 08:51:08 AM
Reply #4
Offline

Adam-Chuang


-->can anyone tell me what distance I have to maintain between LASER head and the part during teaching a new points?

Mostly we maintain 0.5 mm to 2 mm between Laser head tip and the parts.
Each material and thickness have different parameter.

You can check the attaching file for understanding.

I have some experience of robot laser cutting and welding.
 

https://www.youtube.com/watch?v=GzvxAMwR71k&t=45s

This machine in the video is we made for cutting Hydroforming tubes.

If you need more specific parameter. Just tell me what kind material and thickness is. What kind laser (fiber or co 2) and the power limit is?

December 29, 2018, 03:06:37 PM
Reply #5
Offline

Skooter




Share via facebook Share via linkedin Share via pinterest Share via reddit Share via twitter

xx
ABB Laser cutting robot

Started by chhunseang on ABB Robot Forum

15 Replies
1150 Views
Last post July 26, 2018, 09:47:59 PM
by SAABoholic
xx
Laser cutting and welding with robots

Started by vvelikov on KUKA Robot Forum

5 Replies
3012 Views
Last post December 30, 2015, 12:05:20 AM
by tommylight
clip
generating CAD/CAM file to 3D laser cutting application

Started by ak on KUKA Robot Forum

4 Replies
2374 Views
Last post November 10, 2015, 04:35:17 PM
by ak
xx
shape generator laser cutting issue

Started by anis23591 on Fanuc Robot Forum

0 Replies
311 Views
Last post August 02, 2018, 10:50:05 PM
by anis23591