Author Topic: Robotstudio 4.0 (robot: irb 6400-2.4-150)  (Read 9229 times)

0 Members and 1 Guest are viewing this topic.

Offline massula

  • Global Moderator
  • Sr. Member
  • *****
  • Thank You
  • -Given: 76
  • -Receive: 59
  • Posts: 402
    • Robotistas
Re: Robotstudio 4.0 (robot: irb 6400-2.4-150)
« Reply #15 on: March 19, 2018, 03:17:22 PM »

Offline pawel888888

  • Newbie
  • *
  • Thank You
  • -Given: 1
  • -Receive: 0
  • Posts: 8
Re: Robotstudio 4.0 (robot: irb 6400-2.4-150)
« Reply #16 on: March 21, 2018, 10:27:43 PM »
Hi Guys! Any chance some could share link to RobotStudio 4.0 with me? Thanks

Offline massula

  • Global Moderator
  • Sr. Member
  • *****
  • Thank You
  • -Given: 76
  • -Receive: 59
  • Posts: 402
    • Robotistas
Re: Robotstudio 4.0 (robot: irb 6400-2.4-150)
« Reply #17 on: March 21, 2018, 10:49:14 PM »
I will reupload it later.

Offline gasgab90

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 1
Re: Robotstudio 4.0 (robot: irb 6400-2.4-150)
« Reply #18 on: April 15, 2018, 07:13:09 AM »
Hi all!

My old ABB was discontinued.

RobotStudio 4.0 can be downloaded from here.

https://wetransfer.com/downloads/eba3445f04f9f42cb7960218aeef0c6620180314193550/bc52e476f80c7b05eae095c19724d07e20180314193550/4f08b2

It will be available for the next 7 days.

Hi, can you reload the file please? ill' need for programming my s4c+ controller. Thanks a lot

Offline massula

  • Global Moderator
  • Sr. Member
  • *****
  • Thank You
  • -Given: 76
  • -Receive: 59
  • Posts: 402
    • Robotistas
Re: Robotstudio 4.0 (robot: irb 6400-2.4-150)
« Reply #19 on: April 23, 2018, 03:52:07 PM »
Hello, guys.

Here is the link (permanent, I hope) to download ABB RobotStudio 4.0.

I really hope I'm not infringing any copyright from ABB, since this software was available from their own site some time ago.

Take notice that RS 4.0 isn't so straight forward as 5.0. is.

https://mega.nz/#!JeYnyQSD!-0BHTKQcUCWU2s78J83NyaVDArtpzYWZ053qAMz7vIQ

Enjoy!

Offline Pcavan

  • Newbie
  • *
  • Thank You
  • -Given: 1
  • -Receive: 0
  • Posts: 20
Re: Robotstudio 4.0 (robot: irb 6400-2.4-150)
« Reply #20 on: June 20, 2018, 10:05:19 AM »
Hi wondering if any one has a copy of robotstudio 4 available one of my robots uses the m2000 controller please

Offline m.zain

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 1
Re: Robotstudio 4.0 (robot: irb 6400-2.4-150)
« Reply #21 on: September 04, 2018, 02:27:06 PM »
i have 3.1 if needed.

Hello Jarm,
can you please share Robotstudio 3.1 with me

Offline Rossow

  • Newbie
  • *
  • Thank You
  • -Given: 1
  • -Receive: 0
  • Posts: 1
Re: Robotstudio 4.0 (robot: irb 6400-2.4-150)
« Reply #22 on: September 13, 2018, 09:51:03 PM »
I'm also looking for a copy of 4.0 if anyone could help. I'm PM'd massula

Offline massula

  • Global Moderator
  • Sr. Member
  • *****
  • Thank You
  • -Given: 76
  • -Receive: 59
  • Posts: 402
    • Robotistas
Re: Robotstudio 4.0 (robot: irb 6400-2.4-150)
« Reply #23 on: September 14, 2018, 02:52:12 AM »
I'm also looking for a copy of 4.0 if anyone could help. I'm PM'd massula

Rossow, did You tried this one?

https://mega.nz/#!JeYnyQSD!-0BHTKQcUCWU2s78J83NyaVDArtpzYWZ053qAMz7vIQ

Offline davyvdc_Ugent

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 1
Re: Robotstudio 4.0 (robot: irb 6400-2.4-150)
« Reply #24 on: October 18, 2018, 09:45:01 AM »
Hey

I am a master student from the university of Ghent. For my thesis i need to control an IRB6000 robot with Sc4+ controller. I want to do this with serial communication. Does somebody has an solutions for this so i can read data like coordinates and speed out of the robot. I also need to simulate the robot in RS but i can't find a RS4.0 on the internet. Can somebody help me with this?


Offline massula

  • Global Moderator
  • Sr. Member
  • *****
  • Thank You
  • -Given: 76
  • -Receive: 59
  • Posts: 402
    • Robotistas
Re: Robotstudio 4.0 (robot: irb 6400-2.4-150)
« Reply #25 on: October 18, 2018, 02:49:04 PM »
Hello.

I cannot help You about Your remote controller, but You can download RS 4.0 in the link that is above your post in this thread.

This one here:

https://mega.nz/#!JeYnyQSD!-0BHTKQcUCWU2s78J83NyaVDArtpzYWZ053qAMz7vIQ
« Last Edit: October 18, 2018, 02:54:57 PM by massula »