Author Topic: flexpalletizer s4cplus robot issues  (Read 245 times)

0 Members and 1 Guest are viewing this topic.

Offline lunknowl

  • Jr. Member
  • **
  • Thank You
  • -Given: 7
  • -Receive: 0
  • Posts: 66
flexpalletizer s4cplus robot issues
« on: March 13, 2018, 04:32:06 PM »
hi, i try to power on the s4cplus palletizer but it stuck at start in process screen and keep counting. is there away to reset and re instal os? thanks

Offline yolo

  • Moderator
  • Newbie
  • *****
  • Thank You
  • -Given: 5
  • -Receive: 15
  • Posts: 49
Re: flexpalletizer s4cplus robot issues
« Reply #1 on: March 13, 2018, 04:50:10 PM »
hi, i try to power on the s4cplus palletizer but it stuck at start in process screen and keep counting. is there away to reset and re instal os? thanks
A glitching flexpendant cable connector can cause this fault.

Sent from my S41 using Tapatalk


Offline Lemster68

  • Full Member
  • ***
  • Thank You
  • -Given: 0
  • -Receive: 26
  • Posts: 149
  • Ayotollah of the controlla
Re: flexpalletizer s4cplus robot issues
« Reply #2 on: March 13, 2018, 05:05:33 PM »
Otherwise, your boot image is corrupt and you will need to use hyperterminal to log into the cpu via the serial port.  From memory I think you have to command xdelete image.bin.  I am pretty sure other threads here have more details.