XRC scheme cable for backup and parameter RS

[kameleon]

I have problem with backup with pcimcia, socket not work. I have alarm 3080. My card is ok, I tested on another robot XRC

How can I make backup by RS232? (which scheme cable should be use). I tested cable
db9(female) - db9(female)
    2       ------     3                   
    3       ------     2
    5       ------     5 
but dosen't work. Maby some parameter RS is nok?
How should be parameter in robot (RS)

I will use to make backup emulator FC1 for DOS.

[tony gast]

Is emulator FC1 for DOS compatible with XRC
XRC uses DB9 NULL modem cable.....

Which port are you trying to connect to.....the CPU or teach pendant?
If using the CPU board Communications port: RS000 = 3
: RS003 = 1
If using the  Pendant  Communications Port : RS000 = 2
: RS003 = 1

BUAD rate is most causes for connection errors but all setting must match the software settings
• Data bits: RS-0050 = 7 : 7 bits
8 : 8 bits (default)
• Stop bits: RS-0051 = 0 : 1 bits (default)
1 : 1.5 bits
2 : 2 bits
• Parity: RS-0052 = 0 : none
1 : odd
2 : even (default)
• Baud rate: RS-0053 = 1 : 150
2 : 300
3 : 600
4 : 1200
5 : 2400
6 : 4800 (default)
7: 9600