Welcome, Guest. Please login or register.
Did you miss your activation email?
February 08, 2012, 11:54:49 AM
Home Help Login Register
News: Any Problems or Experience with Industrial Robots ?
Register and place your Question / Answer to worldwide Robotexperts right here !

+  Robotforum | Support for Robotprogrammer and Users
|-+  Industrial Robot Help and Discussion Center
| |-+  Yaskawa Motoman Robot Forum (Moderators: Fabian Munoz, Napierian)
| | |-+  Hardware Key Error		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Print
Author Topic: Hardware Key Error  (Read 513 times)
atthaphon
Newbie
*
Offline Offline

Posts: 8
« on: July 14, 2010, 12:41:38 PM »
Now I run program with VB it have Error Hardware Key Error [100] but I can run with another program such as Host control32 and Job Changer32.  Looking for some help, advice, guesses on things to try.... getting pretty desperate here.

Thank you
Logged
Fabian Munoz
Global Moderator
*****
Offline Offline

Gender: Male
Posts: 862


Uruguay Campeon de America 2011 !!!!!!!!!!
« Reply #1 on: July 14, 2010, 01:49:11 PM »
What software are you running, what robot model ?

Is this a usb dongle or a 25 pin ?  I had a similar problem before and that was because the drivers in the usb dongle were corrupt it
Logged
somar
atthaphon
Newbie
*
Offline Offline

Posts: 8
« Reply #2 on: July 15, 2010, 09:56:46 AM »

robot model NX100 HP3 connect with ran cable and I used Hardware Lock Key for commercial to robot with Program High speed JobExchanger and Host Control 32, but if i can write my program with VB it have appear ERROR 100!
Logged
systemer16
Newbie
*
Offline Offline

Posts: 8
« Reply #3 on: August 06, 2010, 08:56:44 AM »
Do you have a usb dungle?
Logged
atthaphon
Newbie
*
Offline Offline

Posts: 8
« Reply #4 on: August 10, 2010, 05:36:42 AM »
now I can use it, thank you
Logged
Pages: [1] Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!