Expand P-Vars for DX100 parameter

[ericm115]

Hey guys. Trying to track down some difficult-to-find info. I need the parameter for expanded P-variables in the DX100. You can expand them by following the directions in the attached document, but I can't because I'm doing offline programming (so I don't have a physical controller to play with). If someone does have a DX100 they could do this on, then do a compare on the ALL.PRM before and after to get the appropriately changed parameters, that would be super helpful and I would be very appreciative.

[motrobot]

Hi,
in this moment I have no Dx100 robot to make the test; but I suppose to be S1D187 (default value=2, that means 2x64=128 P variables). After changing, please remember to initialize the job files (from maintenance, don't forget you will loose all the jobs). I'm not sure this is the right parameter, but I hope this can help you.