Welcome, Guest. Please login or register.
Did you miss your activation email?
May 24, 2012, 11:08:06 AM
Home Help Login Register
News: Any Problems or Experience with Industrial Robots ?
Register and place your Question / Answer to worldwide Robotexperts right here !

+  Robotforum | Support for Robotprogrammer and Users
|-+  Industrial Robot Help and Discussion Center
| |-+  Yaskawa Motoman Robot Forum (Moderators: Fabian Munoz, Napierian)
| | |-+  cooling fan in control box stopped?...but where can I find it??? XRC		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Print
Author Topic: cooling fan in control box stopped?...but where can I find it??? XRC  (Read 479 times)
ScanRobot
Full Member
***
Offline Offline

Posts: 132


WWW
« on: January 30, 2011, 09:00:55 PM »
Hi,

On the teach panel I get this error, but where is this fan...?

thanks. Huh? Huh? Huh?
Logged
Knightey-
Newbie
*
Offline Offline

Gender: Male
Posts: 6
« Reply #1 on: January 31, 2011, 12:02:41 AM »
I got same mistake on NX100. Problem is in powersupply.
Inside of powersupply in NX100 are two 80x80 fans with regulaction of RMP. At first you can try replace by new, but it should be same model.
Logged
roboprof
Jr. Member
**
Offline Offline

Posts: 92
« Reply #2 on: January 31, 2011, 01:50:42 AM »
On the XRC, the fan is actually located at the top of the CPU rack (the XRK01).  You have to remove the CPU rack to get access to the fan.  It should be located directly above the Control Power Supply (CPS-150F), that has the green and red LED indicators...
Logged
amarkangda
Jr. Member
**
Offline Offline

Gender: Male
Posts: 60
« Reply #3 on: January 31, 2011, 12:02:35 PM »
This fan is present in the control Box and is called the Control Power Supply Fan with part code as CPS-420F.
This is present inside the controller(in the rack where you can see indications for Power, 24V, etc). If the Robot is continuously working for more than 8 hours with this fan in OFF condition, then you will get a major alarm which can be reset only by cycling power.

I hope this helps.
Logged
Pages: [1] Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!