Remote MCP VAL3>6.0

[tejon.69]

Has any body experience to do a Remote MCP,  in a PC plataform, like scada or visual basic, or c++, to allow the en user, without MCP conected to the controller CS8C of the robot Staubli with version of val3 higher than 6.0.
If it's possible, is possible  to move the robot in manual mode from the remocte MCP if the controller has the remote working system?

Thank's in advance for your help

[bruceboty]

Yes. You can do this, it is easy if you have good knowledge of advanced language programming such C, C++,etc.

[tejon.69]

Hi bruceboty,

Could you please send me more details, obviously the part of the controller CS8C, and if you have some sample of the part of the pc, I will agree to you.

Thank's

[bruceboty]

Hi bruceboty,

Could you please send me more details, obviously the part of the controller CS8C, and if you have some sample of the part of the pc, I will agree to you.

Thank's

What kind of communication way do you use or plan to use?
CS8C is compatible with any fiedbus(CAN/PROFIBUS/DeviceNet/Modbus) and with serial or ethernet communication. But regarding the remote MCP mode, a Fieldbus communication is much more prefered.

Where are you from ? send me mail if you need more info.

bruceboty@gmail.com

Regards