Welcome, Guest. Please login or register.
Did you miss your activation email?
February 08, 2012, 12:01:44 PM
Home Help Login Register
News: Any Problems or Experience with Industrial Robots ?
Register and place your Question / Answer to worldwide Robotexperts right here !

+  Robotforum | Support for Robotprogrammer and Users
|-+  Industrial Robot Help and Discussion Center
| |-+  Nachi Robots (Moderators: Werner Hampel, Jim Tyrer, Martin H, Fabian Munoz)
| | |-+  Does my program or wiring circuit?		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Print
Author Topic: Does my program or wiring circuit?  (Read 480 times)
alffibonacci
Guest
« on: February 15, 2010, 10:21:43 PM »
I have 2 robots NACHI S130F, initially operative. When I tried to play it, the program wasn't run. The message showed says: "The External Stop is given", but I checked & I not found the problem. I can't activate the Start button. I've revised any manuals and now I think that the prob maybe is in the programming. Maybe I need another manual.
Therefore, I would know if anybody can help me.
If any have programed and then have run and it worked, please show me the way to give own life to my robot.
Thanks.

PD: I want that my robot move!

A.
« Last Edit: February 16, 2010, 12:10:46 AM by alffibonacci » Logged
alffibonacci
Guest
« Reply #1 on: February 17, 2010, 10:55:00 PM »
I found the prob. In the wiring circuit, the external stop signal was free. I`ve had to bypass wires, the Y01 to GND.
Apparently all input signals were dissconnected, but it works normally because the conections was there...

Finally!, I've managed to move the robot, Now the programs run ok, they were well done...
Logged
Pages: [1] Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!