Shut down of HMI and cross without shutting down windows

[m_garbus]

Hi All

I was wundering how is right way to shut down the HMI and cross3 on a KRC2 without shutting down windows? After minimizing the HMI I try to use the "Stop All" function or X (top right corner) to close down the Cross3 and HMI manually I can't start the HMI again without rebooting the computer. In fact when I try to start the HMI by pressing the trafficlight icon the HMI will stall showing the splash screen "HMI ->Started"

I know that you can hold down CTRL during windows startup to avoid the HMI to start.

Thanks.

[stefanm]

Using a mouse, it is very easy. Just klick somewhere in the line, where you see caps, num, date etc.
Then press exit.
In the start center just rightkclick - stop all.
To restart the HMA, "Start - Programs - Autostart - KUKABOF"