Welcome, Guest. Please login or register.
Did you miss your activation email?
February 09, 2012, 03:51:12 AM
Home Help Login Register
News: Any Problems or Experience with Industrial Robots ?
Register and place your Question / Answer to worldwide Robotexperts right here !

+  Robotforum | Support for Robotprogrammer and Users
|-+  Industrial Robot Help and Discussion Center
| |-+  KUKA Robot Forum (Moderators: Werner Hampel, Martin H, SkyeFire)
| | |-+  Switching from Kuka interface back to windows		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Print
Author Topic: Switching from Kuka interface back to windows  (Read 500 times)
DoyleTuttle
Newbie
*
Offline Offline

Posts: 2
« on: September 01, 2010, 03:09:50 PM »
Hi, and thanks for your time. Does anyone know the key combination to go from the kuka interface back to windows. I have a KRC2 running windows 95. Thanks in advance.
Logged
SkyeFire
Global Moderator
*****
Offline Offline

Posts: 1627
« Reply #1 on: September 01, 2010, 03:52:14 PM »
You have to be in Expert or Administrator mode, not User.

Turn off the NUM LOCK.  Now the "2" key on the numeric pad should act as CTRL.

Press CTRL-ESC.  This should pop up the Windows start bar.

Scroll through the menu to find the program you want.

With NUM LOCK off, ALT-TAB will work as well.
Logged
DoyleTuttle
Newbie
*
Offline Offline

Posts: 2
« Reply #2 on: September 13, 2010, 05:28:44 PM »
Thanks for the reply. My problem was that I was still in the User mode. Switched to Expert and all went well. Thanks.
Logged
73ta455
Newbie
*
Offline Offline

Posts: 20
« Reply #3 on: September 30, 2010, 12:28:53 AM »
if you have a mouse plugged in you can also click on one of the lower info bars and it will kick you over to windows.
Logged
Pages: [1] Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!