routing & sanding

[ike_lemas]

good day guys..

act i'm looking for routing & sanding machine to be attach to KR16. the problem is i couldn't find a supplier for the product. can u guys help me out here?? it'll be very helpful if u guys can suggest any supplier.thanks

[TylerRobertson]

Hi there,

For sanding, it may be desirable to investigate what pushcorp can do for your application: http://pushcorp.com/products-index.htm

[mookie]

fwiw,

KUKA robotics has a camrob package that is being used to do this application

[ike_lemas]

i'm in the state to finallize between robotmaster and camrob. from the literature that i've read on camrob,they doesn't have or maybe didn't provide router for kr16. is there any of you guys familiar with this application? oh, forgot to mention, what i'm going to do is to machine 1500m x 3000m x 1500m FRP (fiber reinforced polymer) block, where the block is mounted on turntable & linear unit. i really need a liitle help out here guys.  and 1 more thing, for this application,is there any difference between milling spindle and router spindle? thanks.

[TygerDawg]

If all you are looking for is a method of creating 3D robot path points for routering applications, then you should look at www.robotworks-eu.com .

[happytriger2000]

Hi,
     Pushcorp : http://www.pushcorp.com/success.htm, I was going to buy their product, but the price is way too high, over my budget.

 I'm currently settinup my kuka Kr150 + PDS Colombo Spindle, so looking forward to this. I will be using the latest version of Powermill to run my robot.