Welcome, Guest. Please login or register.
Did you miss your activation email?
December 04, 2008, 01:13:06 AM
Home Help Search Calendar Login Register
News: Any Problems or Experience with Industrial Robots ?
Register and place your Question to worldwide Robotexperts right here !

+  Robotforum | Support for Robotprogrammer and Users
|-+  Robot Help and Discussion Center
| |-+  Kawasaki Robots
| | |-+  D1518 - Have somebody problems with that error ?		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Print
Author Topic: D1518 - Have somebody problems with that error ?  (Read 417 times)
Irek Krauze
Newbie
*
Offline Offline

Posts: 12
« on: February 14, 2008, 12:01:20 PM »
The error D1518 apears only wen I push the Emergency stop, There is no way to reset it. I must turn the power OFF, and then ON.

Sorry For my errors in text, I am learning.
Logged
Kōkaku kidōtai
Newbie
*
Offline Offline

Posts: 31


The net is vast and infinite...
« Reply #1 on: February 15, 2008, 01:31:46 PM »
Hi,

take a look at the error description in the attachment - there is clearly something wrong with your emergency circuit. Check wiring and options in the controller. Is it a new robot (from supplier) or used one ??

Good Luck !!
Logged
Irek Krauze
Newbie
*
Offline Offline

Posts: 12
« Reply #2 on: February 20, 2008, 02:21:51 PM »
The problem was in the 1kp board. I replace it end the error is no more. Robot is New, Thx For Help.

 dance
Logged
Kōkaku kidōtai
Newbie
*
Offline Offline

Posts: 31


The net is vast and infinite...
« Reply #3 on: February 20, 2008, 02:42:57 PM »
Your problem is solved, that's good.
I'm glad I could help.

What kind of application are you integrating ?
Handling/welding/painting ?

What is your opinion about Kawasaki robots ?
Do you find them easier in comparison to other brands of robots ?

Regards
Logged
Irek Krauze
Newbie
*
Offline Offline

Posts: 12
« Reply #4 on: February 21, 2008, 05:07:17 PM »
I am integrating in this job only handing aplications. I was working on Fanuc robots beafore, but with welding aplicatons.

When i compare Fanuc And Kawasaki robots, in my opinion Fanuc was easier to teach.
I hate yellow colour so i am glad i can work with white robots hehe. icon_smile

I am working now with 25 robots ZX165U, 3 robots FS020N.
regards.
Logged
Pages: [1] Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.7 | SMF © 2006-2008, Simple Machines LLC Valid XHTML 1.0! Valid CSS!