Welcome, Guest. Please login or register.
Did you miss your activation email?
December 04, 2008, 02:54:12 AM
Home Help Search Calendar Login Register
News: Any Problems or Experience with Industrial Robots ?
Register and place your Question to worldwide Robotexperts right here !

+  Robotforum | Support for Robotprogrammer and Users
|-+  Robot Help and Discussion Center
| |-+  Fanuc Robots (Moderators: Sven Weyer, Jim Tyrer)
| | |-+  Manuals		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: 1 2 [3] 4 Print
Author Topic: Manuals  (Read 5223 times)
Professor_J
Jr. Member
**
Offline Offline

Gender: Male
Posts: 76
« Reply #30 on: April 04, 2008, 12:34:20 AM »
Does anyone have a S-12 Mechanical Unit Maintenance manual? If you don't have a pdf; a copy of the page on payload specs etc would do the trick (ie how much weight can we bolt onto the robot!)..

Thanks
Logged
Collision
Newbie
*
Offline Offline

Posts: 5
« Reply #31 on: April 04, 2008, 07:31:55 PM »
Fanuc S-12 Specifications:

Axes 6
Payload 12 kg
H-Reach 1605 mm
Mounting upright, inverted, wall
Repeatability ±0.1 mm
Robot Mass 230 kg
Robot Motion Range
J1 ±330°
J2 ±265°
J3 ±45°
J4 ±380°
J5 ±280°
J6 ±540°
Robot Motion Speed
J1 135°/s (2.36 rad/s)
J2 120°/s (2.09 rad/s)
J3 135°/s (2.36 rad/s)
J4 240°/s (4.19 rad/s)
J5 240°/s (4.19 rad/s)
J6 400°/s (6.98 rad/s)
Logged
industri
Newbie
*
Offline Offline

Posts: 3
« Reply #32 on: April 05, 2008, 06:26:20 AM »
I have just bought a Fanuc Arcmate 100i with RJ2 Controller and Powerwave 450 welder

Unfortunately there are no manuals for anything

can anyone help me out

thanks

 
Logged
Professor_J
Jr. Member
**
Offline Offline

Gender: Male
Posts: 76
« Reply #33 on: April 07, 2008, 05:15:57 AM »
Collision,

Thanks for info on the S-12.. The 12kg payload is for the wrist I gather. Do you know what the maximum "Armload" is?

Thanks
Logged
edbanks
Newbie
*
Offline Offline

Gender: Male
Posts: 21



WWW
« Reply #34 on: April 08, 2008, 02:29:23 AM »
As far as I know, your payload is the "arm load" or the maximum carrying capacity of the robot. Not just of the wrist, but of all combined axis. Are you talking about mounting something on the arm like a valve stack or cabling?
Logged
---
Ed Banks
Lead Automation Engineer
Professor_J
Jr. Member
**
Offline Offline

Gender: Male
Posts: 76
« Reply #35 on: April 08, 2008, 03:12:09 AM »
Yes, we want to mount something on the back of the robot..

The attached jpeg shows the info for the various R-2000 robots, I wanted to try and find out this info for an S-12.. Thanks
Logged
cezanne
Newbie
*
Offline Offline

Posts: 35
« Reply #36 on: April 09, 2008, 04:43:20 PM »
Need manuals for Rj3iC?  grinser043
Logged
asimo
Full Member
***
Offline Offline

Posts: 174
« Reply #37 on: April 22, 2008, 04:38:46 AM »
I don't know if this will be of any help but there is one document here:

http://www.iamapathetic.com/fanuc/
Logged
cezanne
Newbie
*
Offline Offline

Posts: 35
« Reply #38 on: April 23, 2008, 07:48:39 PM »
Thanx asimo, the manual is very helpful and useful 

 
Logged
avboy
Newbie
*
Offline Offline

Posts: 15
« Reply #39 on: May 16, 2008, 09:50:09 PM »
 Fish

much thanks!

I would not have found so many people use theFUNAC robot!
Logged
Fanuc Boy
Newbie
*
Offline Offline

Posts: 2
« Reply #40 on: May 17, 2008, 05:04:46 PM »
Hello,
First time poster here, I am in dire need of the
SYSTEM R-J Software Installation Manual . Could anyone Send it to me ?

I am having trouble loading Handling tool V4.40-1
I get through disk 3 of 3 and everything seems fine but once it get to
 [ saving uncompressed data] I get a Port timeout fault.

 books on hand=MAROKPS1210301E  Floppy drive Emulator v3.07P
                           MAROGJ2LT06501E   Line tracking setup     v4.10
                           MARO2HAND02501E Controler handling setup  v4.10-01
Logged
Professor_J
Jr. Member
**
Offline Offline

Gender: Male
Posts: 76
« Reply #41 on: June 19, 2008, 01:41:35 AM »
Servo Gun Manual..
Logged
megaman26
Newbie
*
Offline Offline

Posts: 4
« Reply #42 on: September 19, 2008, 01:48:45 AM »
Somebody have some manual about the programming the karel for a robot S-420F with a controler RH?  all manual about of this topic many thanks
Logged
cezanne
Newbie
*
Offline Offline

Posts: 35
« Reply #43 on: September 19, 2008, 08:13:11 PM »
Nice manual Prof_J
Logged
megaman26
Newbie
*
Offline Offline

Posts: 4
« Reply #44 on: October 03, 2008, 04:14:58 PM »
Some body have manuals about the controler RH programming Karel 2.2 the robot S420F?  Profesor_J dont answer me!!
Logged
Pages: 1 2 [3] 4 Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.7 | SMF © 2006-2008, Simple Machines LLC Valid XHTML 1.0! Valid CSS!