Welcome, Guest. Please login or register.
Did you miss your activation email?
May 23, 2012, 05:41:42 AM
Home Help Login Register
News: Any Problems or Experience with Industrial Robots ?
Register and place your Question / Answer to worldwide Robotexperts right here !

+  Robotforum | Support for Robotprogrammer and Users
|-+  Industrial Robot Help and Discussion Center
| |-+  Fanuc Robot Forum (Moderators: Sven Weyer, Jim Tyrer, Lerak, Napierian)
| | |-+  PMC		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Print
Author Topic: PMC  (Read 224 times)
Akbari
Jr. Member
**
Offline Offline

Posts: 72
PMC
« on: January 11, 2012, 11:17:27 AM »
Hi
Does the PMC ladder is option in R-30iAMate ?
How can i understand this controller have PMC ladder ?
If this controller have PMC ladder How can i connect to that ?
Thanks
Logged
flatcurve
Sr. Member
****
Offline Offline

Posts: 358
« Reply #1 on: January 11, 2012, 02:32:06 PM »
PMC ladder is an option you need to explicitly order. If you don't know whether or not it was ordered, there are a couple ways to check. If you have power to the robot, the easiest way to check is to turn it on, press the I/O button on the teach pendant, then press F1 [TYPE] and see if you have 'PMC' and 'PMC Display' listed in the menus.

Otherwise you need to look at the build list that came with the software memory card for the robot.
Logged
Pages: [1] Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!