Welcome, Guest. Please login or register.
Did you miss your activation email?
May 23, 2012, 05:16:45 AM
Home Help Login Register
News: Any Problems or Experience with Industrial Robots ?
Register and place your Question / Answer to worldwide Robotexperts right here !

+  Robotforum | Support for Robotprogrammer and Users
|-+  Industrial Robot Help and Discussion Center
| |-+  Fanuc Robot Forum (Moderators: Sven Weyer, Jim Tyrer, Lerak, Napierian)
| | |-+  Flash Memory		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Print
Author Topic: Flash Memory  (Read 513 times)
sccrcoach
Jr. Member
**
Offline Offline

Posts: 79
« on: March 29, 2010, 06:15:58 PM »
When powering on my arcmate robot stops at initializing flash file....is the only cause for this a bad flash memory board? I changed the flash memory module and I got the same thing....replaced the main board and it booted normally....Do I have a bad main board or any other ideas will be greatly appreciated.  Thanks in advance for the help.
« Last Edit: March 29, 2010, 10:36:45 PM by sccrcoach » Logged
Robotter
Sr. Member
****
Offline Offline

Gender: Male
Posts: 404


Everything is simple... once you know how..!!
« Reply #1 on: March 30, 2010, 05:05:17 AM »
Check out this post. maybe helpful!

http://www.robot-forum.com/robotforum/fanuc_robot_forum/fanuc_rj2_startup_problems-t2960.0.html
Logged
Routerguy
Guest
« Reply #2 on: March 30, 2010, 10:48:32 PM »
I agree start with the TP and Cable if no help more then likely you have a software coruption
Logged
sccrcoach
Jr. Member
**
Offline Offline

Posts: 79
« Reply #3 on: March 31, 2010, 06:41:50 PM »
I replaced the main board and reloaded software and now it works...thanks
Logged
Pages: [1] Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!