Welcome, Guest. Please login or register.
Did you miss your activation email?
May 22, 2012, 07:11:42 AM
Home Help Login Register
News: Any Problems or Experience with Industrial Robots ?
Register and place your Question / Answer to worldwide Robotexperts right here !

+  Robotforum | Support for Robotprogrammer and Users
|-+  Industrial Robot Help and Discussion Center
| |-+  Fanuc Robot Forum (Moderators: Sven Weyer, Jim Tyrer, Lerak, Napierian)
| | |-+  Declination		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Print
Author Topic: Declination  (Read 140 times)
wheensy
Newbie
*
Offline Offline

Gender: Male
Posts: 33
« on: January 13, 2012, 03:26:34 PM »
On an Arc Mate 120iB/10L I have a declination of close to 1.25 inches or 31.75mm is this normal? My TCP is within 1mm of accuracy. I figured this from one end of a 10 foot shell. The shell is level with only an 1/8" from one end being higher than the other. I created a point at one end of the shell saved that position using PR[n]=LPOS added 10' to the x-plane using PR[n]=PR[n]+R[n]. I converted the register in an earlier line to metric.
« Last Edit: January 13, 2012, 03:37:00 PM by wheensy » Logged
Fabian Munoz
Global Moderator
*****
Offline Offline

Gender: Male
Posts: 917


Uruguay Campeon de America 2011 !!!!!!!!!!
« Reply #1 on: January 13, 2012, 03:45:52 PM »
Hi
i dont quite understand your set up, but    you said your shell is level,  is the robot level ? is it parallel to the shell ?
I mean, on a 10' path "straight"  is easy to be off that much
Logged
somar
Pages: [1] Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!