Welcome, Guest. Please login or register.
Did you miss your activation email?
May 22, 2012, 07:10:01 AM
Home Help Login Register
News: Any Problems or Experience with Industrial Robots ?
Register and place your Question / Answer to worldwide Robotexperts right here !

+  Robotforum | Support for Robotprogrammer and Users
|-+  Industrial Robot Help and Discussion Center
| |-+  Fanuc Robot Forum (Moderators: Sven Weyer, Jim Tyrer, Lerak, Napierian)
| | |-+  Checksum Error Fanuc R-J2 Help 		0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Print
Author Topic: Checksum Error Fanuc R-J2 Help  (Read 471 times)
BrightTech
Newbie
*
Offline Offline

Posts: 18
« on: November 03, 2011, 09:26:12 PM »
 

When the cabinet is powered on we get a Checksum Error on the Tp, and the screen wont leave. Any idea what that means? I cant find it in the book anywhere. Thank You!
Logged
BrightTech
Newbie
*
Offline Offline

Posts: 18
« Reply #1 on: November 17, 2011, 04:04:56 PM »
The error is Checksum: 7C9D7428. Now the Robot Cycle will run in Auto mode, but the TP screen will not leave the Checksum error message. Thanks
Logged
Napierian
Global Moderator
*****
Offline Offline

Gender: Male
Posts: 298



WWW
« Reply #2 on: November 30, 2011, 09:48:07 PM »
Bad TP Communications between pendant and controller.  replace the pendant and cable and this should go away (It may just be the cable)

good luck
Logged
Jeff Kocher
Robotics Technologist
2Ri Robotics
www.2rirobotics.com
FAQ - http://www.2rirobotics.com/Robot-Info/Pages/FAQ.aspx
15 Cope Court
Guelph, ON N1K 0A4
Tel 519-829-2335 Ext 24
Fax 519-829-2346
24 Hour service 519-993-2335
Piloto
Newbie
*
Offline Offline

Posts: 16
« Reply #3 on: December 30, 2011, 10:06:58 PM »
Is possible the Flash ROM Module is broken, tries to replace the Flaxh Rom Module.
Logged
BrightTech
Newbie
*
Offline Offline

Posts: 18
« Reply #4 on: January 11, 2012, 06:03:20 PM »
Thank you for all the replies. I replaced the TP cable and that fixed it!
Logged
Pages: [1] Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!