RobotstudioOnline and S4c+

[Jim Tyrer]

Can I use RS Online 5.9 to set up a S4C+?
Or do I have to use FTP and a text editor?

Any way of finding what the service port IP address is by poking about on the flexpendant?

thanks Guys.

[Sven Weyer]

Can I use RS Online 5.9 to set up a S4C+?
-> No. You must use RobInstall for install a new system. The programmodule you can load with a ftp-programm on the flashdisk by the controller and then you can load with the menu by the robot controler the diffent modules.

The IP on this service port is 192.168.125.1
You pc must have IP 192.168.125.82
the Subnet mask must have 255.255.255.240
and the standard gateway must have 192.168.81

The you can up- and download with a ftp-program.

Sven

[Jim Tyrer]

Danke Sven.

[Sven Weyer]

You are welcome!