Welcome, Guest. Please login or register.
Did you miss your activation email?
February 08, 2012, 10:49:02 AM
Home Help Login Register
News: Any Problems or Experience with Industrial Robots ?
Register and place your Question / Answer to worldwide Robotexperts right here !

+  Robotforum | Support for Robotprogrammer and Users
|-+  Industrial Robot Help and Discussion Center
| |-+  ABB Robot Forum (Moderators: Werner Hampel, Sven Weyer, Jim Tyrer, Napierian)
| | |-+  S3 controller question		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Print
Author Topic: S3 controller question  (Read 340 times)
markman
Guest
« on: August 21, 2010, 09:02:08 PM »
does the s3 controller have a " P-P to main" function like the IRC5?
Logged
Ztek
Jr. Member
**
Offline Offline

Posts: 56

Service engineer and programmer of ABB and Adept.
« Reply #1 on: August 23, 2010, 10:58:33 AM »
Yes!
Long time since I used a S3-system, but I think you press the button with the hand and then one of the soft buttons says "zero" or something like that. I have only used the swedish version of S3 so I do not know exactly. Pressing that softbutton moves the program pointer to the start of the program and resets all registers.

You can use a system input as start from beginning as on S4 and IRC5 too, at least on S3 M93.
Logged
Pages: [1] Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!