OPC server for S4c+

[h.esk60]

Hi to all

I want to use opc server s4c+ for monitoring with VB.
Is there any opc server for s4c+ and what is the memory map for s4c+.

Please help me

[h.esk60]

Please help me .

[prnuk2003]

Have you looked at Webware SDK or Webware server

http://www05.abb.com/global/scot/scot352.nsf/veritydisplay/cce679f6d3d652d8c125766d003a4469/$file/ww_sdk_4.9_manual.pdf

I have no experience of this but it could be somewhere to start.

[h.esk60]

Many thanks for your pdf.
 
I have a opc server s4 and interlink module software .
I want just have a communication between VB and robot .
Would you please help me is it possible to use of these software(opc server s4 , interlink module) for this work or no i need webware sdk for this work?

[prnuk2003]

Unfortunatley I have never used any OPC functionality on the controllers but I would suggest looking at the WebwareSDK (Webware Server is for more than one robot) and any questions you have then your local ABB should have a software specialist to advise you.

[eureka]

I have used serial communication to connect C# software. I had created a software for count cycle of some robots. I know this is not the best way to get communicate but that was worked for me.