Welcome, Guest. Please login or register.
Did you miss your activation email?
May 22, 2012, 04:58:05 AM
Home Help Login Register
News: Any Problems or Experience with Industrial Robots ?
Register and place your Question / Answer to worldwide Robotexperts right here !

+  Robotforum | Support for Robotprogrammer and Users
|-+  Industrial Robot Help and Discussion Center
| |-+  ABB Robot Forum (Moderators: Werner Hampel, Sven Weyer, Jim Tyrer, Napierian)
| | |-+  Error 117013		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Print
Author Topic: Error 117013  (Read 232 times)
richerraine
Newbie
*
Offline Offline

Posts: 2
« on: November 17, 2011, 05:55:38 PM »
I am getting an error code 117013 Weld equipment Error it is happening intermittently but gets worse the longer the robot is used as if something is overheating. It is on a S4+ anybody have any Ideas ? and yes all the fans seem to be running
Logged
prnuk2003
Sr. Member
****
Offline Offline

Gender: Male
Posts: 339


Customer Service Engineer
« Reply #1 on: November 17, 2011, 09:02:52 PM »
I don't see any error with that number in any of my manuals - is there any other text with the error?

Common 'equipment errors' could be voltage, current, cooling water or gas supervision during a welding or at startup - all depends on the equipment you have installed and how it is monitored by the controller.
Logged
BR
prnuk2003
richerraine
Newbie
*
Offline Offline

Posts: 2
« Reply #2 on: November 24, 2011, 02:15:07 PM »
I seem to have cured the problem by blowing down all the welding equipment with an airline so I am pretty confident it was a overheating problem our electrician says he has traced it down to a board in there I will update if we trace it down but it now seems to be operating correctly
Logged
Pages: [1] Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!