Author Topic: FlexiDrive for ABB S4  (Read 347 times)

Offline FlexiDrive

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 7
FlexiDrive for ABB S4
« on: July 26, 2013, 11:38:50 AM »
Hi ABB S3 fans, here an interesting product for your ABB S3 Robots.

FlexiDriveMV - Floppy Drive Update to SD card or USB PenDrive. No more floppy disks!
This is a direct replacement for the floppy drive unit.
You remove the actual 3.5” floppy drive, connect the FlexiDrive and that’s all.
You will not use floppy disks and old floppy drive units any more.
You will use a standard SD memory card or USB PenDrive. You can storage up 2500 floppies in a single SD card or USB Stick.
Also for all ABB from ABB S3 M92, M93 , S4 to S4c+, old KUKA's, Kawasaki's, FANUC's, or any industrial machine!

http://www.floppyemulator.com/robot-abb-s3/

Full guaranty and support.

Best Regrads,
The FlexiDrive support team
www.floppyemulator.com